[Wed Oct 26 21:31:36 2011] Detection parameters:
  Position = (709.5, 1040.5) = 6 7 50.23 -6 26 20.0
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 38.4 +/- 6.3
  Background counts = 1.6
  Rate = 0.0004 +/- 7e-05

[Wed Oct 26 21:31:41 2011] Off-axis axis estimate = 3.50'
[Wed Oct 26 21:33:44 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:44 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Oct 26 21:33:44 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.619
[Wed Oct 26 21:33:44 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 0.69"
[Wed Oct 26 21:33:46 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36.ximg exists
[Wed Oct 26 21:33:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36.csv
[Wed Oct 26 21:33:46 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36_1.ximg exists
[Wed Oct 26 21:33:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36.csv
[Wed Oct 26 21:33:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01882_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:33:47 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Wed Oct 26 21:33:47 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Wed Oct 26 21:33:47 2011] Fit fullrun_ccd1_acisf01882_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Wed Oct 26 21:34:30 2011] Spatial fit model total counts = 52.072400, observed total counts = 56.000000
[Wed Oct 26 21:34:30 2011] Offset between fit and detection position for source 30 = 0.727645 pixels
[Wed Oct 26 21:34:30 2011] 51.873100 total counts/ 10.564600 bgd. counts: snr = 12.709044
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.727645 pixels
  Position = (709.8, 1041.2) = 6 7 50.24 -6 26 20.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 41.3 +/- 7.2
  Background counts = 10.6
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:34:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:30 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:30 2011] Source does appear to be extended
[Wed Oct 26 21:34:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:39 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Oct 26 21:35:39 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.084
[Wed Oct 26 21:35:39 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.46"
[Wed Oct 26 21:35:43 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36.ximg exists
[Wed Oct 26 21:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36.csv
[Wed Oct 26 21:35:43 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36_1.ximg exists
[Wed Oct 26 21:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36.csv
[Wed Oct 26 21:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01882_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:45 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Wed Oct 26 21:35:45 2011] fullrun_ccd1_acisf01882_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Oct 26 21:35:45 2011] Fit fullrun_ccd1_acisf01882_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Wed Oct 26 21:36:25 2011] Spatial fit model total counts = 50.889500, observed total counts = 55.000000
[Wed Oct 26 21:36:25 2011] Offset between fit and detection position for source 30 = 0.016852 pixels
[Wed Oct 26 21:36:25 2011] 50.230290 total counts/ 9.199790 bgd. counts: snr = 13.527510
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.016852 pixels
  Position = (709.8, 1041.2) = 6 7 50.24 -6 26 20.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 41.0 +/- 7.1
  Background counts = 9.2
  Rate = 0.0004 +/- 7e-05
[Wed Oct 26 21:36:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:25 2011] Source does appear to be extended
[Wed Oct 26 21:36:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:39:03 2011] Not overwriting source region fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.reg
[Wed Oct 26 21:39:03 2011] Extracting stamp from image fullrun_ccd1_acisf01882_pi14-548_cl_sm2.00.img.gz, (689, 1020) - (731, 1062)
[Wed Oct 26 21:39:03 2011] Writing fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30.gif
[Wed Oct 26 21:40:45 2011] ../../acisf01882/products/events/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.evt and ../../acisf01882/products/events/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Oct 26 21:40:45 2011] Size of ../../acisf01882/products/events/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.evt.gz[events] = 47 counts
[Wed Oct 26 21:40:45 2011] Mean chipx,y = (261.13, 730.28)
[Wed Oct 26 21:40:45 2011] Mean tdetx,y = (4401.72, 4368.13)
[Wed Oct 26 21:40:45 2011] chipx,y range = (241.00-276.00, 713.00-749.00)
[Wed Oct 26 21:40:45 2011] Size of ../../acisf01882/products/events/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 13 counts
[Wed Oct 26 21:40:45 2011] ../../acisf01882/products/images/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.img and ../../acisf01882/products/images/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Oct 26 21:40:45 2011] ../../acisf01882/products/spectra/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.pi and ../../acisf01882/products/spectra/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Oct 26 21:40:45 2011] Not generating rmf since there are only 41 counts
[Wed Oct 26 21:40:48 2011] ../../acisf01882/products/lightcurves/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Oct 26 21:43:02 2011] 199.383
[Wed Oct 26 21:55:47 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:47 2011] Error reading totcts from fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30_src.pi.gz
[Wed Oct 26 21:55:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:48 2011] Using photon index=1.80, rate=0.000424, arf fullrun_ccd1_acisf01882_pi14-548_pass1_cl_src30.arf
[Wed Oct 26 21:55:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:48 2011] Updating source flux to 4.7e-15
[Wed Oct 26 21:56:21 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting