[Wed Oct 26 21:31:32 2011] Detection parameters:
  Position = (684.5, 533.5) = 6 8 17.66 -6 25 25.9
  Extent = 1.4" x 1.3", rotation angle = 163 degrees
  Source counts = 62.1 +/- 8.7
  Background counts = 13.9
  Rate = 0.0006 +/- 9e-05

[Wed Oct 26 21:31:34 2011] Off-axis axis estimate = 7.20'
[Wed Oct 26 21:33:41 2011] Using EEF radius (= 2.30 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:41 2011] Initial guess for spatial extent in simple fitting = 2.30"
[Wed Oct 26 21:33:41 2011] source mask rpix=4.7, npix_max = 107, mask sum = 121, frac = 1.126
[Wed Oct 26 21:33:41 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 2.30"
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25.ximg exists
[Wed Oct 26 21:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25.csv
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25_1.ximg exists
[Wed Oct 26 21:33:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25.csv
[Wed Oct 26 21:33:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Oct 26 21:33:43 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Wed Oct 26 21:34:20 2011] Spatial fit model total counts = 97.999600, observed total counts = 98.000000
[Wed Oct 26 21:34:20 2011] Offset between fit and detection position for source 30 = 1.488657 pixels
[Wed Oct 26 21:34:20 2011] 97.704000 total counts/ 19.945900 bgd. counts: snr = 17.410804
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.488657 pixels
  Position = (685.9, 534.1) = 6 8 17.63 -6 25 25.8
  Extent = 3.0 (2.3-3.6)", rotation angle = 0
  Source counts = 77.8 +/- 9.9
  Background counts = 19.9
  Rate = 0.0008 +/- 0.0001
[Wed Oct 26 21:34:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:20 2011] Source does appear to be extended
[Wed Oct 26 21:34:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:34 2011] Initial guess for spatial extent in simple fitting = 2.96"
[Wed Oct 26 21:35:34 2011] source mask rpix=6.0, npix_max = 169, mask sum = 169, frac = 0.997
[Wed Oct 26 21:35:34 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 2.96"
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25.csv
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25_1.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25.csv
[Wed Oct 26 21:35:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Oct 26 21:35:39 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Oct 26 21:36:15 2011] Spatial fit model total counts = 113.000000, observed total counts = 113.000000
[Wed Oct 26 21:36:15 2011] Offset between fit and detection position for source 30 = 0.244631 pixels
[Wed Oct 26 21:36:15 2011] 112.702200 total counts/ 37.990000 bgd. counts: snr = 12.121514
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.244631 pixels
  Position = (685.6, 534.1) = 6 8 17.64 -6 25 25.8
  Extent = 2.9 (2.3-3.4)", rotation angle = 0
  Source counts = 74.7 +/- 10.6
  Background counts = 38.0
  Rate = 0.0008 +/- 0.0001
[Wed Oct 26 21:36:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:15 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:15 2011] Source does appear to be extended
[Wed Oct 26 21:36:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:37:30 2011] Not overwriting source region fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.reg
[Wed Oct 26 21:37:30 2011] Extracting stamp from image fullrun_ccd0_acisf01882_pi14-548_cl_sm2.00.img.gz, (554, 402) - (818, 666)
[Wed Oct 26 21:37:30 2011] Writing fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30.gif
[Wed Oct 26 21:38:39 2011] ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.evt and ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Oct 26 21:38:39 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.evt.gz[events] = 101 counts
[Wed Oct 26 21:38:39 2011] Mean chipx,y = (351.79, 608.80)
[Wed Oct 26 21:38:39 2011] Mean tdetx,y = (3669.80, 4780.21)
[Wed Oct 26 21:38:39 2011] chipx,y range = (320.00-384.00, 582.00-647.00)
[Wed Oct 26 21:38:39 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 358 counts
[Wed Oct 26 21:38:39 2011] ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.img and ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Oct 26 21:38:39 2011] ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.pi and ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Oct 26 21:38:39 2011] Not generating rmf since there are only 74 counts
[Wed Oct 26 21:38:42 2011] ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Oct 26 21:39:01 2011] 182.118
[Wed Oct 26 21:55:46 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:46 2011] Error reading totcts from fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30_src.pi.gz
[Wed Oct 26 21:55:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:46 2011] Using photon index=1.80, rate=0.000772, arf fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src30.arf
[Wed Oct 26 21:55:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:46 2011] Updating source flux to 9.2e-15
[Wed Oct 26 21:56:03 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting