[Wed Oct 26 21:31:32 2011] Detection parameters:
  Position = (645.5, 448.5) = 6 8 18.95 -6 26 7.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 36.1 +/- 6.6
  Background counts = 6.9
  Rate = 0.0004 +/- 7e-05

[Wed Oct 26 21:31:34 2011] Off-axis axis estimate = 7.77'
[Wed Oct 26 21:33:41 2011] Using EEF radius (= 2.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:41 2011] Initial guess for spatial extent in simple fitting = 2.67"
[Wed Oct 26 21:33:41 2011] source mask rpix=5.4, npix_max = 140, mask sum = 94, frac = 0.668
[Wed Oct 26 21:33:41 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 2.67"
[Wed Oct 26 21:33:42 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15.ximg exists
[Wed Oct 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15.csv
[Wed Oct 26 21:33:42 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15_1.ximg exists
[Wed Oct 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15.csv
[Wed Oct 26 21:33:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Oct 26 21:33:43 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Oct 26 21:34:20 2011] Spatial fit model total counts = 111.231000, observed total counts = 111.000000
[Wed Oct 26 21:34:20 2011] Offset between fit and detection position for source 18 = 1.355999 pixels
[Wed Oct 26 21:34:20 2011] 111.417000 total counts/ 48.417700 bgd. counts: snr = 9.053857
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.355999 pixels
  Position = (646.8, 448.7) = 6 8 18.92 -6 26 7.9
  Extent = 2.3 (1.8-2.9)", rotation angle = 0
  Source counts = 63.0 +/- 10.6
  Background counts = 48.4
  Rate = 0.0007 +/- 0.0001
[Wed Oct 26 21:34:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:20 2011] Source does appear to be extended
[Wed Oct 26 21:34:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:34 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Wed Oct 26 21:35:34 2011] source mask rpix=4.7, npix_max = 108, mask sum = 86, frac = 0.790
[Wed Oct 26 21:35:34 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 2.32"
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 21:35:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Oct 26 21:35:39 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Oct 26 21:36:15 2011] Spatial fit model total counts = 96.783200, observed total counts = 97.000000
[Wed Oct 26 21:36:15 2011] Offset between fit and detection position for source 18 = 0.233187 pixels
[Wed Oct 26 21:36:15 2011] 97.068800 total counts/ 30.915500 bgd. counts: snr = 11.897710
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.233187 pixels
  Position = (646.8, 448.5) = 6 8 18.92 -6 26 8.0
  Extent = 2.4 (1.8-3.0)", rotation angle = 0
  Source counts = 66.2 +/- 9.9
  Background counts = 30.9
  Rate = 0.0007 +/- 0.0001
[Wed Oct 26 21:36:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:15 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:15 2011] Source does appear to be extended
[Wed Oct 26 21:36:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:37:30 2011] Not overwriting source region fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.reg
[Wed Oct 26 21:37:30 2011] Extracting stamp from image fullrun_ccd0_acisf01882_pi14-548_cl_sm2.00.img.gz, (537, 338) - (757, 559)
[Wed Oct 26 21:37:30 2011] Writing fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18.gif
[Wed Oct 26 21:38:13 2011] ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.evt and ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed Oct 26 21:38:13 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.evt.gz[events] = 94 counts
[Wed Oct 26 21:38:13 2011] Mean chipx,y = (259.37, 628.44)
[Wed Oct 26 21:38:13 2011] Mean tdetx,y = (3689.44, 4872.63)
[Wed Oct 26 21:38:13 2011] chipx,y range = (233.00-287.00, 597.00-656.00)
[Wed Oct 26 21:38:13 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 227 counts
[Wed Oct 26 21:38:13 2011] ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.img and ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed Oct 26 21:38:13 2011] ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.pi and ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed Oct 26 21:38:13 2011] Not generating rmf since there are only 66 counts
[Wed Oct 26 21:38:15 2011] ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed Oct 26 21:39:01 2011] 178.731
[Wed Oct 26 21:55:45 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:45 2011] Error reading totcts from fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18_src.pi.gz
[Wed Oct 26 21:55:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:46 2011] Using photon index=1.80, rate=0.000683, arf fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src18.arf
[Wed Oct 26 21:55:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:46 2011] Updating source flux to 8.3e-15
[Wed Oct 26 21:56:03 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting