[Wed Oct 26 21:31:32 2011] Detection parameters:
  Position = (672.4, 930.2) = 6 8 18.06 -6 22 10.7
  Extent = 1.9" x 1.5", rotation angle = 26 degrees
  Source counts = 281.5 +/- 17.5
  Background counts = 24.5
  Rate = 0.003 +/- 0.0002

[Wed Oct 26 21:31:34 2011] Off-axis axis estimate = 6.85'
[Wed Oct 26 21:33:41 2011] Using EEF radius (= 2.09 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:33:41 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Wed Oct 26 21:33:41 2011] source mask rpix=4.3, npix_max = 90, mask sum = 90, frac = 0.997
[Wed Oct 26 21:33:41 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.09"
[Wed Oct 26 21:33:42 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 21:33:42 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct 26 21:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11.csv
[Wed Oct 26 21:33:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct 26 21:33:43 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct 26 21:33:43 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct 26 21:34:20 2011] Spatial fit model total counts = 322.937000, observed total counts = 326.000000
[Wed Oct 26 21:34:20 2011] Offset between fit and detection position for source 13 = 0.520463 pixels
[Wed Oct 26 21:34:20 2011] 323.318900 total counts/ 71.461900 bgd. counts: snr = 29.793172
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.520463 pixels
  Position = (672.5, 930.7) = 6 8 18.07 -6 22 10.7
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 251.9 +/- 18.0
  Background counts = 71.5
  Rate = 0.003 +/- 0.0002
[Wed Oct 26 21:34:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:34:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:34:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:34:20 2011] Source does appear to be extended
[Wed Oct 26 21:34:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:35:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:35:34 2011] Initial guess for spatial extent in simple fitting = 1.81"
[Wed Oct 26 21:35:34 2011] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.030
[Wed Oct 26 21:35:34 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.81"
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11.csv
[Wed Oct 26 21:35:38 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct 26 21:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11.csv
[Wed Oct 26 21:35:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01882_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct 26 21:35:39 2011] fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct 26 21:35:39 2011] Fit fullrun_ccd0_acisf01882_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct 26 21:36:15 2011] Spatial fit model total counts = 317.737000, observed total counts = 318.000000
[Wed Oct 26 21:36:15 2011] Offset between fit and detection position for source 13 = 0.029848 pixels
[Wed Oct 26 21:36:15 2011] 318.010200 total counts/ 73.567200 bgd. counts: snr = 28.499385
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.029848 pixels
  Position = (672.5, 930.7) = 6 8 18.07 -6 22 10.7
  Extent = 1.7 (1.5-1.9)", rotation angle = 0
  Source counts = 244.4 +/- 17.8
  Background counts = 73.6
  Rate = 0.003 +/- 0.0002
[Wed Oct 26 21:36:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 21:36:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 21:36:15 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 21:36:15 2011] Source does appear to be extended
[Wed Oct 26 21:36:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 21:37:30 2011] Not overwriting source region fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.reg
[Wed Oct 26 21:37:30 2011] Extracting stamp from image fullrun_ccd0_acisf01882_pi14-548_cl_sm2.00.img.gz, (593, 851) - (752, 1010)
[Wed Oct 26 21:37:30 2011] Writing fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13.gif
[Wed Oct 26 21:38:02 2011] ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.evt and ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed Oct 26 21:38:02 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.evt.gz[events] = 299 counts
[Wed Oct 26 21:38:02 2011] Mean chipx,y = (659.72, 359.91)
[Wed Oct 26 21:38:02 2011] Mean tdetx,y = (3420.91, 4472.28)
[Wed Oct 26 21:38:02 2011] chipx,y range = (631.00-686.00, 332.00-386.00)
[Wed Oct 26 21:38:02 2011] Size of ../../acisf01882/products/events/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 104 counts
[Wed Oct 26 21:38:02 2011] ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.img and ../../acisf01882/products/images/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed Oct 26 21:38:02 2011] ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.pi and ../../acisf01882/products/spectra/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed Oct 26 21:38:05 2011] ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.lc and ../../acisf01882/products/lightcurves/fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed Oct 26 21:39:01 2011] Keeping rmf generated by specextract
[Wed Oct 26 21:39:01 2011] 184.187
[Wed Oct 26 21:55:45 2011] Updating aperture counts using extracted products
[Wed Oct 26 21:55:45 2011] Error reading totcts from fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Oct 26 21:55:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 21:55:46 2011] Using photon index=1.80, rate=0.00252, arf fullrun_ccd0_acisf01882_pi14-548_pass1_cl_src13.arf
[Wed Oct 26 21:55:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 21:55:46 2011] Updating source flux to 3e-14