[Sun Oct 16 08:19:53 2011] Detection parameters:
  Position = (945.1, 1088.5) = 6 34 17.23 4 25 3.0
  Extent = 0.6" x 0.5", rotation angle = 66 degrees
  Source counts = 18.6 +/- 4.4
  Background counts = 0.4
  Rate = 0.001 +/- 0.0002

[Sun Oct 16 08:19:56 2011] Off-axis axis estimate = 2.76'
[Sun Oct 16 08:20:58 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 08:20:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 08:20:58 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sun Oct 16 08:20:58 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.191
[Sun Oct 16 08:20:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.53"
[Sun Oct 16 08:20:59 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 08:20:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 08:20:59 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 08:20:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 08:20:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01877_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 08:20:59 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 08:20:59 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 08:20:59 2011] Fit fullrun_ccd0_acisf01877_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 08:21:12 2011] Spatial fit model total counts = 21.404600, observed total counts = 22.000000
[Sun Oct 16 08:21:12 2011] Offset between fit and detection position for source 1 = 0.878841 pixels
[Sun Oct 16 08:21:12 2011] 21.191690 total counts/ 4.512690 bgd. counts: snr = 7.851493
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.878841 pixels
  Position = (945.8, 1089.0) = 6 34 17.22 4 25 3.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 16.7 +/- 4.6
  Background counts = 4.5
  Rate = 0.0009 +/- 0.0002
[Sun Oct 16 08:21:12 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 08:21:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 08:21:12 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 08:21:12 2011] Source does appear to be extended
[Sun Oct 16 08:21:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:21:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 08:21:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 08:21:41 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 16 08:21:41 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.127
[Sun Oct 16 08:21:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.56"
[Sun Oct 16 08:21:41 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 08:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 08:21:41 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 08:21:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 08:21:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01877_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 08:21:42 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 08:21:42 2011] fullrun_ccd0_acisf01877_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 08:21:42 2011] Fit fullrun_ccd0_acisf01877_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 08:21:55 2011] Spatial fit model total counts = 22.998500, observed total counts = 23.000000
[Sun Oct 16 08:21:55 2011] Offset between fit and detection position for source 1 = 0.004855 pixels
[Sun Oct 16 08:21:55 2011] 22.923090 total counts/ 6.101290 bgd. counts: snr = 6.810228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004855 pixels
  Position = (945.8, 1089.0) = 6 34 17.22 4 25 3.0
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 16.8 +/- 4.8
  Background counts = 6.1
  Rate = 0.0009 +/- 0.0002
[Sun Oct 16 08:21:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 08:21:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 08:21:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 08:21:55 2011] Source does appear to be extended
[Sun Oct 16 08:21:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:22:22 2011] Not overwriting source region fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 16 08:22:22 2011] Extracting stamp from image fullrun_ccd0_acisf01877_pi14-548_cl_sm2.00.img.gz, (921, 1064) - (971, 1114)
[Sun Oct 16 08:22:22 2011] Writing fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1.gif
[Sun Oct 16 08:22:27 2011] ../../acisf01877/products/events/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.evt and ../../acisf01877/products/events/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 16 08:22:27 2011] Size of ../../acisf01877/products/events/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18 counts
[Sun Oct 16 08:22:27 2011] Mean chipx,y = (788.78, 937.22)
[Sun Oct 16 08:22:27 2011] Mean tdetx,y = (3998.22, 4343.22)
[Sun Oct 16 08:22:27 2011] chipx,y range = (772.00-806.00, 922.00-954.00)
[Sun Oct 16 08:22:27 2011] Size of ../../acisf01877/products/events/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Sun Oct 16 08:22:27 2011] ../../acisf01877/products/images/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.img and ../../acisf01877/products/images/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 16 08:22:27 2011] Not generating rmf since there are only 16 counts
[Sun Oct 16 08:22:27 2011] arf not found, will run specextract
[Sun Oct 16 08:22:29 2011] ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_bkg.pi not found
[Sun Oct 16 08:22:29 2011] ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 16 08:22:29 2011] ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 16 08:22:29 2011] Removal of ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 16 08:22:29 2011] Failed to rename ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_grp.pi to ../../acisf01877/products/spectra/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.pi
[Sun Oct 16 08:22:35 2011] ../../acisf01877/products/lightcurves/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.lc and ../../acisf01877/products/lightcurves/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 16 08:26:34 2011] No arf file found
[Sun Oct 16 08:37:16 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:37:16 2011] Error reading totcts from fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_src.pi
[Sun Oct 16 08:37:17 2011] No arf file for this source, not re-computing flux
[Sun Oct 16 08:37:22 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:37:23 2011] acisf01877/analysis//spectral/fullrun_ccd0_acisf01877_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete