[Sat Sep 24 14:26:36 2011] Detection parameters:
  Position = (1059.6, 726.5) = 6 32 19.94 4 48 19.3
  Extent = 2.1" x 1.5", rotation angle = 151 degrees
  Source counts = 69.3 +/- 8.6
  Background counts = 4.7
  Rate = 0.004 +/- 0.0004

[Sat Sep 24 14:26:53 2011] Off-axis axis estimate = 7.58'
[Sat Sep 24 14:28:27 2011] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:28:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:28:27 2011] Initial guess for spatial extent in simple fitting = 2.55"
[Sat Sep 24 14:28:27 2011] source mask rpix=5.2, npix_max = 128, mask sum = 121, frac = 0.939
[Sat Sep 24 14:28:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.55"
[Sat Sep 24 14:28:30 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 14:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:28:30 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 14:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01875_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:28:30 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 14:28:30 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:28:30 2011] Fit fullrun_ccd3_acisf01875_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:28:46 2011] Spatial fit model total counts = 80.651400, observed total counts = 80.000000
[Sat Sep 24 14:28:46 2011] Offset between fit and detection position for source 1 = 0.920484 pixels
[Sat Sep 24 14:28:46 2011] 80.848200 total counts/ 10.542400 bgd. counts: snr = 21.653166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.920484 pixels
  Position = (1060.4, 726.9) = 6 32 19.93 4 48 19.3
  Extent = 2.4 (1.9-2.8)", rotation angle = 0
  Source counts = 70.3 +/- 9.0
  Background counts = 10.5
  Rate = 0.004 +/- 0.0005
[Sat Sep 24 14:28:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:28:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:28:46 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:28:46 2011] Source does appear to be extended
[Sat Sep 24 14:28:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:29:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:29:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:29:19 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Sat Sep 24 14:29:19 2011] source mask rpix=4.9, npix_max = 114, mask sum = 110, frac = 0.960
[Sat Sep 24 14:29:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.39"
[Sat Sep 24 14:29:24 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 14:29:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:29:24 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 14:29:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:29:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01875_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:29:25 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 14:29:25 2011] fullrun_ccd3_acisf01875_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:29:25 2011] Fit fullrun_ccd3_acisf01875_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:29:40 2011] Spatial fit model total counts = 78.999000, observed total counts = 79.000000
[Sat Sep 24 14:29:40 2011] Offset between fit and detection position for source 1 = 0.166156 pixels
[Sat Sep 24 14:29:40 2011] 79.169600 total counts/ 11.189600 bgd. counts: snr = 20.322348
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166156 pixels
  Position = (1060.2, 727.0) = 6 32 19.94 4 48 19.3
  Extent = 2.3 (1.8-2.8)", rotation angle = 0
  Source counts = 68.0 +/- 8.9
  Background counts = 11.2
  Rate = 0.003 +/- 0.0005
[Sat Sep 24 14:29:40 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:29:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:29:40 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:29:40 2011] Source does appear to be extended
[Sat Sep 24 14:29:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:35:38 2011] Not overwriting source region fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.reg
[Sat Sep 24 14:35:38 2011] Extracting stamp from image fullrun_ccd3_acisf01875_pi14-548_cl_sm2.00.img.gz, (956, 622) - (1165, 831)
[Sat Sep 24 14:35:38 2011] Writing fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1.gif
[Sat Sep 24 14:35:40 2011] ../../acisf01875/products/events/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.evt and ../../acisf01875/products/events/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Sep 24 14:35:40 2011] Size of ../../acisf01875/products/events/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.evt.gz[events] = 76 counts
[Sat Sep 24 14:35:40 2011] Mean chipx,y = (612.29, 141.13)
[Sat Sep 24 14:35:40 2011] Mean tdetx,y = (4990.87, 3673.29)
[Sat Sep 24 14:35:40 2011] chipx,y range = (583.00-638.00, 119.00-169.00)
[Sat Sep 24 14:35:40 2011] Size of ../../acisf01875/products/events/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 46 counts
[Sat Sep 24 14:35:40 2011] ../../acisf01875/products/images/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.img and ../../acisf01875/products/images/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Sep 24 14:35:40 2011] Not generating rmf since there are only 67 counts
[Sat Sep 24 14:35:40 2011] arf not found, will run specextract
[Sat Sep 24 14:35:42 2011] ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_bkg.pi not found
[Sat Sep 24 14:35:42 2011] ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1.warf not found
[Sat Sep 24 14:35:42 2011] ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1.wrmf not found
[Sat Sep 24 14:35:42 2011] Removal of ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1.soff failed
[Sat Sep 24 14:35:42 2011] Failed to rename ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_grp.pi to ../../acisf01875/products/spectra/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.pi
[Sat Sep 24 14:35:47 2011] ../../acisf01875/products/lightcurves/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.lc and ../../acisf01875/products/lightcurves/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Sep 24 14:41:27 2011] No arf file found
[Sat Sep 24 14:42:01 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:42:01 2011] Error reading totcts from fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_src.pi
[Sat Sep 24 14:42:01 2011] No arf file for this source, not re-computing flux
[Sat Sep 24 14:42:07 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep 24 14:42:08 2011] acisf01875/analysis//spectral/fullrun_ccd3_acisf01875_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete