[Fri Oct 28 14:05:04 2011] Detection parameters:
  Position = (392.0, 700.6) = 6 31 39.54 4 53 15.2
  Extent = 0.5" x 0.5", rotation angle = 113 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0002

[Fri Oct 28 14:05:07 2011] Off-axis axis estimate = 4.13'
[Fri Oct 28 14:06:27 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:06:27 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Oct 28 14:06:27 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Fri Oct 28 14:06:27 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.87"
[Fri Oct 28 14:06:29 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass0_src38.ximg exists
[Fri Oct 28 14:06:29 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass0_src38_1.ximg exists
[Fri Oct 28 14:06:29 2011] Fit fullrun_ccd1_acisf01874_pi14-548_cl_pass0_src38 appears to have run properly
[Fri Oct 28 14:06:33 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Fri Oct 28 14:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38.csv
[Fri Oct 28 14:06:33 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Oct 28 14:06:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38.csv
[Fri Oct 28 14:06:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01874_pi14-548_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:07:04 2011] Spatial fit model total counts = 9.892120, observed total counts = 12.000000
[Fri Oct 28 14:07:04 2011] Offset between fit and detection position for source 9 = 0.434403 pixels
[Fri Oct 28 14:07:04 2011] 10.682253 total counts/ 0.521353 bgd. counts: snr = 14.072337
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.434403 pixels
  Position = (392.2, 701.0) = 6 31 39.55 4 53 15.2
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 10.2 +/- 3.3
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0002
[Fri Oct 28 14:07:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:07:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:07:04 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:07:04 2011] Source does appear to be extended
[Fri Oct 28 14:07:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 14:07:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:07:52 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Fri Oct 28 14:07:52 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.188
[Fri Oct 28 14:07:52 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.66"
[Fri Oct 28 14:07:54 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36.ximg exists
[Fri Oct 28 14:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36.csv
[Fri Oct 28 14:07:54 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36_1.ximg exists
[Fri Oct 28 14:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36.csv
[Fri Oct 28 14:07:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01874_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:07:54 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Fri Oct 28 14:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36.csv
[Fri Oct 28 14:07:54 2011] fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Oct 28 14:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36.csv
[Fri Oct 28 14:07:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf01874_pi14-548_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:08:25 2011] Spatial fit model total counts = 10.548800, observed total counts = 12.000000
[Fri Oct 28 14:08:25 2011] Offset between fit and detection position for source 9 = 0.029949 pixels
[Fri Oct 28 14:08:25 2011] 11.250930 total counts/ 1.024230 bgd. counts: snr = 10.105011
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.029949 pixels
  Position = (392.3, 701.0) = 6 31 39.55 4 53 15.2
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 10.2 +/- 3.4
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0002
[Fri Oct 28 14:08:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:08:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:08:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:08:25 2011] Source does appear to be extended
[Fri Oct 28 14:08:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 14:18:00 2011] Not overwriting source region fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 28 14:18:00 2011] Extracting stamp from image fullrun_ccd1_acisf01874_pi14-548_cl_sm2.00.img.gz, (364, 672) - (421, 730)
[Fri Oct 28 14:18:00 2011] Writing fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9.gif
[Fri Oct 28 14:22:27 2011] ../../acisf01874/products/events/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.evt and ../../acisf01874/products/events/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 28 14:22:27 2011] Size of ../../acisf01874/products/events/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.evt.gz[events] = 10 counts
[Fri Oct 28 14:22:27 2011] Mean chipx,y = (367.60, 759.10)
[Fri Oct 28 14:22:27 2011] Mean tdetx,y = (4372.90, 4474.60)
[Fri Oct 28 14:22:27 2011] chipx,y range = (355.00-376.00, 738.00-772.00)
[Fri Oct 28 14:22:27 2011] Size of ../../acisf01874/products/events/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 9 counts
[Fri Oct 28 14:22:27 2011] ../../acisf01874/products/images/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.img and ../../acisf01874/products/images/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 28 14:22:27 2011] Not generating rmf since there are only 10 counts
[Fri Oct 28 14:22:27 2011] arf not found, will run specextract
[Fri Oct 28 14:22:29 2011] ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_bkg.pi not found
[Fri Oct 28 14:22:29 2011] ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9.warf not found
[Fri Oct 28 14:22:29 2011] ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9.wrmf not found
[Fri Oct 28 14:22:29 2011] Removal of ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9.soff failed
[Fri Oct 28 14:22:29 2011] Failed to rename ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_grp.pi to ../../acisf01874/products/spectra/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.pi
[Fri Oct 28 14:22:34 2011] ../../acisf01874/products/lightcurves/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.lc and ../../acisf01874/products/lightcurves/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 28 14:24:57 2011] No arf file found
[Fri Oct 28 14:41:42 2011] Updating aperture counts using extracted products
[Fri Oct 28 14:41:42 2011] Error reading totcts from fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_src.pi
[Fri Oct 28 14:41:42 2011] No arf file for this source, not re-computing flux
[Fri Oct 28 14:41:51 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 14:41:52 2011] acisf01874/analysis//spectral/fullrun_ccd1_acisf01874_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete