[Fri Oct 28 14:05:00 2011] Detection parameters:
  Position = (833.9, 782.1) = 6 31 56.30 4 50 30.2
  Extent = 0.9" x 0.6", rotation angle = 88 degrees
  Source counts = 24.8 +/- 5.1
  Background counts = 1.2
  Rate = 0.001 +/- 0.0003

[Fri Oct 28 14:05:03 2011] Off-axis axis estimate = 5.31'
[Fri Oct 28 14:06:24 2011] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:06:24 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Fri Oct 28 14:06:24 2011] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.900
[Fri Oct 28 14:06:24 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 1.31"
[Fri Oct 28 14:06:26 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31.ximg exists
[Fri Oct 28 14:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31.csv
[Fri Oct 28 14:06:26 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31_1.ximg exists
[Fri Oct 28 14:06:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31.csv
[Fri Oct 28 14:06:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01874_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:06:27 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Fri Oct 28 14:06:27 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Oct 28 14:06:27 2011] Fit fullrun_ccd0_acisf01874_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Oct 28 14:06:58 2011] Spatial fit model total counts = 25.940700, observed total counts = 28.000000
[Fri Oct 28 14:06:58 2011] Offset between fit and detection position for source 33 = 0.561432 pixels
[Fri Oct 28 14:06:58 2011] 25.753711 total counts/ 0.718011 bgd. counts: snr = 29.545694
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.561432 pixels
  Position = (834.4, 781.8) = 6 31 56.30 4 50 29.8
  Extent = 1.2" x 0.8", rotation angle = 90
  Source counts = 25.0 +/- 5.1
  Background counts = 0.7
  Rate = 0.001 +/- 0.0003
[Fri Oct 28 14:06:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:06:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:06:58 2011] Assessing source extent using major
[Fri Oct 28 14:06:58 2011] Source does appear to be extended
[Fri Oct 28 14:06:58 2011] Computing asymmetry using major and minor axis, asym = 1.62
[Fri Oct 28 14:06:58 2011] Source is asymmetric
[Fri Oct 28 14:07:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:07:48 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Fri Oct 28 14:07:48 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Fri Oct 28 14:07:48 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.98"
[Fri Oct 28 14:07:51 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27.ximg exists
[Fri Oct 28 14:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27.csv
[Fri Oct 28 14:07:51 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Oct 28 14:07:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27.csv
[Fri Oct 28 14:07:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01874_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:07:52 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Oct 28 14:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27.csv
[Fri Oct 28 14:07:52 2011] fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Oct 28 14:07:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27.csv
[Fri Oct 28 14:07:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01874_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:08:21 2011] Spatial fit model total counts = 25.991500, observed total counts = 28.000000
[Fri Oct 28 14:08:21 2011] Offset between fit and detection position for source 33 = 0.308275 pixels
[Fri Oct 28 14:08:21 2011] 26.108308 total counts/ 0.281408 bgd. counts: snr = 48.685996
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.308275 pixels
  Position = (834.5, 782.1) = 6 31 56.30 4 50 29.9
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 25.8 +/- 5.1
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003
[Fri Oct 28 14:08:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:08:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:08:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:08:21 2011] Source does appear to be extended
[Fri Oct 28 14:08:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 14:09:08 2011] Not overwriting source region fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.reg
[Fri Oct 28 14:09:08 2011] Extracting stamp from image fullrun_ccd0_acisf01874_pi14-548_cl_sm2.00.img.gz, (790, 737) - (879, 827)
[Fri Oct 28 14:09:08 2011] Writing fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33.gif
[Fri Oct 28 14:13:20 2011] ../../acisf01874/products/events/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.evt and ../../acisf01874/products/events/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri Oct 28 14:13:20 2011] Size of ../../acisf01874/products/events/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.evt.gz[events] = 28 counts
[Fri Oct 28 14:13:20 2011] Mean chipx,y = (560.00, 711.61)
[Fri Oct 28 14:13:20 2011] Mean tdetx,y = (3772.61, 4572.00)
[Fri Oct 28 14:13:20 2011] chipx,y range = (543.00-582.00, 691.00-730.00)
[Fri Oct 28 14:13:20 2011] Size of ../../acisf01874/products/events/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 17 counts
[Fri Oct 28 14:13:20 2011] ../../acisf01874/products/images/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.img and ../../acisf01874/products/images/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri Oct 28 14:13:20 2011] Not generating rmf since there are only 25 counts
[Fri Oct 28 14:13:20 2011] arf not found, will run specextract
[Fri Oct 28 14:13:21 2011] ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_bkg.pi not found
[Fri Oct 28 14:13:21 2011] ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33.warf not found
[Fri Oct 28 14:13:21 2011] ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33.wrmf not found
[Fri Oct 28 14:13:21 2011] Removal of ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33.soff failed
[Fri Oct 28 14:13:21 2011] Failed to rename ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_grp.pi to ../../acisf01874/products/spectra/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.pi
[Fri Oct 28 14:13:27 2011] ../../acisf01874/products/lightcurves/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.lc and ../../acisf01874/products/lightcurves/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri Oct 28 14:17:59 2011] No arf file found
[Fri Oct 28 14:41:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 14:41:41 2011] Error reading totcts from fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_src.pi
[Fri Oct 28 14:41:41 2011] No arf file for this source, not re-computing flux
[Fri Oct 28 14:41:50 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 14:41:51 2011] acisf01874/analysis//spectral/fullrun_ccd0_acisf01874_pi14-548_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete