[Sun Oct 30 05:19:07 2011] Detection parameters:
  Position = (611.5, 249.2) = 8 51 44.00 11 48 49.7
  Extent = 1.0" x 0.6", rotation angle = 90 degrees
  Source counts = 27.4 +/- 5.4
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0001

[Sun Oct 30 05:19:08 2011] Off-axis axis estimate = 5.14'
[Sun Oct 30 05:20:17 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:20:17 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Sun Oct 30 05:20:17 2011] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.153
[Sun Oct 30 05:20:17 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.24"
[Sun Oct 30 05:20:18 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 30 05:20:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:20:18 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 30 05:20:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 05:20:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01873_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:20:19 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 30 05:20:19 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:20:19 2011] Fit fullrun_ccd3_acisf01873_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:20:38 2011] Spatial fit model total counts = 36.987800, observed total counts = 37.000000
[Sun Oct 30 05:20:38 2011] Offset between fit and detection position for source 19 = 0.925559 pixels
[Sun Oct 30 05:20:38 2011] 36.822100 total counts/ 12.332800 bgd. counts: snr = 6.973415
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.925559 pixels
  Position = (611.9, 250.0) = 8 51 44.01 11 48 49.9
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 24.5 +/- 6.1
  Background counts = 12.3
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 05:20:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:20:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:20:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:20:38 2011] Source does appear to be extended
[Sun Oct 30 05:20:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:21:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:21:22 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sun Oct 30 05:21:22 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.812
[Sun Oct 30 05:21:22 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.98"
[Sun Oct 30 05:21:23 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 05:21:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:21:23 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 05:21:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 05:21:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01873_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:21:23 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 05:21:23 2011] fullrun_ccd3_acisf01873_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 05:21:23 2011] Fit fullrun_ccd3_acisf01873_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 30 05:21:42 2011] Spatial fit model total counts = 37.996200, observed total counts = 38.000000
[Sun Oct 30 05:21:42 2011] Offset between fit and detection position for source 19 = 0.147337 pixels
[Sun Oct 30 05:21:42 2011] 37.694000 total counts/ 14.721900 bgd. counts: snr = 5.987131
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.147337 pixels
  Position = (611.8, 250.2) = 8 51 44.01 11 48 50.0
  Extent = 0.9 (0.7-1.4)", rotation angle = 0
  Source counts = 23.0 +/- 6.1
  Background counts = 14.7
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 05:21:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:21:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:21:42 2011] Source does appear to be extended
[Sun Oct 30 05:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:26:52 2011] Not overwriting source region fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.reg
[Sun Oct 30 05:26:52 2011] Extracting stamp from image fullrun_ccd3_acisf01873_pi14-548_cl_sm2.00.img.gz, (570, 209) - (653, 292)
[Sun Oct 30 05:26:52 2011] Writing fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19.gif
[Sun Oct 30 05:27:24 2011] ../../acisf01873/products/events/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.evt and ../../acisf01873/products/events/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sun Oct 30 05:27:24 2011] Size of ../../acisf01873/products/events/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.evt.gz[events] = 33 counts
[Sun Oct 30 05:27:24 2011] Mean chipx,y = (347.45, 888.39)
[Sun Oct 30 05:27:24 2011] Mean tdetx,y = (4243.61, 3408.45)
[Sun Oct 30 05:27:24 2011] chipx,y range = (331.00-369.00, 867.00-907.00)
[Sun Oct 30 05:27:24 2011] Size of ../../acisf01873/products/events/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 32 counts
[Sun Oct 30 05:27:24 2011] ../../acisf01873/products/images/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.img and ../../acisf01873/products/images/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Sun Oct 30 05:27:24 2011] ../../acisf01873/products/spectra/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.pi and ../../acisf01873/products/spectra/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sun Oct 30 05:27:24 2011] Not generating rmf since there are only 22 counts
[Sun Oct 30 05:27:27 2011] ../../acisf01873/products/lightcurves/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.lc and ../../acisf01873/products/lightcurves/fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sun Oct 30 05:28:28 2011] 183.471
[Sun Oct 30 05:28:53 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:28:53 2011] Error reading totcts from fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19_src.pi.gz
[Sun Oct 30 05:28:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:28:53 2011] Using photon index=1.80, rate=0.000497, arf fullrun_ccd3_acisf01873_pi14-548_pass1_cl_src19.arf
[Sun Oct 30 05:28:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:28:53 2011] Updating source flux to 5.9e-15
[Sun Oct 30 05:29:58 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting