[Sun Oct 30 05:19:03 2011] Detection parameters:
  Position = (903.9, 1174.9) = 8 51 23.28 11 48 26.6
  Extent = 0.5" x 0.5", rotation angle = 82 degrees
  Source counts = 472.6 +/- 21.8
  Background counts = 3.4
  Rate = 0.01 +/- 0.0005

[Sun Oct 30 05:19:05 2011] Off-axis axis estimate = 1.15'
[Sun Oct 30 05:20:15 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:20:15 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 05:20:15 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.616
[Sun Oct 30 05:20:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Sun Oct 30 05:20:16 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:20:16 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:20:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01873_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:20:16 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:20:16 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:20:16 2011] Fit fullrun_ccd2_acisf01873_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:20:35 2011] Spatial fit model total counts = 477.000000, observed total counts = 477.000000
[Sun Oct 30 05:20:35 2011] Offset between fit and detection position for source 1 = 0.751707 pixels
[Sun Oct 30 05:20:35 2011] 476.331500 total counts/ 10.699500 bgd. counts: snr = 142.351182
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.751707 pixels
  Position = (904.4, 1175.5) = 8 51 23.28 11 48 26.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 465.6 +/- 21.8
  Background counts = 10.7
  Rate = 0.01 +/- 0.0005
[Sun Oct 30 05:20:35 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:20:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:20:35 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:20:35 2011] Source does appear to be extended
[Sun Oct 30 05:20:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:21:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:21:18 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Oct 30 05:21:18 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.185
[Sun Oct 30 05:21:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Sun Oct 30 05:21:20 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 05:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:21:20 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 05:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:21:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01873_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:21:21 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 05:21:21 2011] fullrun_ccd2_acisf01873_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:21:21 2011] Fit fullrun_ccd2_acisf01873_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:21:39 2011] Spatial fit model total counts = 476.912000, observed total counts = 477.000000
[Sun Oct 30 05:21:39 2011] Offset between fit and detection position for source 1 = 0.001248 pixels
[Sun Oct 30 05:21:39 2011] 475.808940 total counts/ 9.735940 bgd. counts: snr = 149.370557
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001248 pixels
  Position = (904.4, 1175.5) = 8 51 23.28 11 48 26.6
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 466.1 +/- 21.8
  Background counts = 9.7
  Rate = 0.01 +/- 0.0005
[Sun Oct 30 05:21:39 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:21:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:21:39 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:21:39 2011] Source does appear to be extended
[Sun Oct 30 05:21:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:25:02 2011] Not overwriting source region fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 05:25:02 2011] Extracting stamp from image fullrun_ccd2_acisf01873_pi14-548_cl_sm2.00.img.gz, (885, 1156) - (924, 1195)
[Sun Oct 30 05:25:02 2011] Writing fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 05:25:04 2011] ../../acisf01873/products/events/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.evt and ../../acisf01873/products/events/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 05:25:04 2011] Size of ../../acisf01873/products/events/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.evt.gz[events] = 467 counts
[Sun Oct 30 05:25:04 2011] Mean chipx,y = (101.27, 940.82)
[Sun Oct 30 05:25:04 2011] Mean tdetx,y = (4001.82, 3984.73)
[Sun Oct 30 05:25:04 2011] chipx,y range = (84.00-120.00, 924.00-958.00)
[Sun Oct 30 05:25:04 2011] Size of ../../acisf01873/products/events/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Sun Oct 30 05:25:04 2011] ../../acisf01873/products/images/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.img and ../../acisf01873/products/images/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 05:25:04 2011] ../../acisf01873/products/spectra/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.pi and ../../acisf01873/products/spectra/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 05:25:07 2011] ../../acisf01873/products/lightcurves/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.lc and ../../acisf01873/products/lightcurves/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 05:26:51 2011] Keeping rmf generated by specextract
[Sun Oct 30 05:26:51 2011] 206.417
[Sun Oct 30 05:28:52 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:28:52 2011] Error reading totcts from fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 05:28:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:28:52 2011] Using photon index=1.80, rate=0.0101, arf fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:28:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:28:52 2011] Updating source flux to 1.1e-13
[Sun Oct 30 05:29:58 2011] Reading fit data from acisf01873/analysis//spectral/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 30 05:29:58 2011] Spectral fit parameter nH value = 1.84386e+21
[Sun Oct 30 05:29:58 2011] Spectral fit parameter PhoIndex value = 3.43085
[Sun Oct 30 05:29:58 2011] Failed to get F(0.3-8.0) from acisf01873/analysis//spectral/fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 05:29:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:29:58 2011] Using Nh = 1.8e+21, photon index=3.43, rate=0.0101, arf fullrun_ccd2_acisf01873_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:29:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:29:58 2011] Updating source flux to 7.7e-14