[Sun Oct 30 05:18:57 2011] Detection parameters:
  Position = (501.5, 603.2) = 8 51 3.83 11 46 30.0
  Extent = 1.3" x 0.9", rotation angle = 170 degrees
  Source counts = 227.3 +/- 15.3
  Background counts = 6.7
  Rate = 0.005 +/- 0.0003

[Sun Oct 30 05:19:00 2011] Off-axis axis estimate = 5.66'
[Sun Oct 30 05:20:12 2011] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:20:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:20:12 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Sun Oct 30 05:20:12 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Sun Oct 30 05:20:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.47"
[Sun Oct 30 05:20:12 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 05:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:20:12 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 05:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 05:20:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01873_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:20:13 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 05:20:13 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:20:13 2011] Fit fullrun_ccd0_acisf01873_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:20:28 2011] Spatial fit model total counts = 238.280000, observed total counts = 238.000000
[Sun Oct 30 05:20:28 2011] Offset between fit and detection position for source 1 = 0.679528 pixels
[Sun Oct 30 05:20:28 2011] 237.832700 total counts/ 16.130700 bgd. counts: snr = 55.200499
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.679528 pixels
  Position = (501.9, 603.7) = 8 51 3.83 11 46 30.0
  Extent = 1.4 (1.3-1.6)", rotation angle = 0
  Source counts = 221.7 +/- 15.4
  Background counts = 16.1
  Rate = 0.005 +/- 0.0003
[Sun Oct 30 05:20:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:20:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:20:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:20:28 2011] Source does appear to be extended
[Sun Oct 30 05:20:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:21:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 05:21:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 05:21:11 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Sun Oct 30 05:21:11 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.898
[Sun Oct 30 05:21:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.44"
[Sun Oct 30 05:21:11 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 05:21:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:21:11 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 05:21:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 05:21:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01873_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 05:21:12 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 05:21:12 2011] fullrun_ccd0_acisf01873_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 05:21:12 2011] Fit fullrun_ccd0_acisf01873_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 05:21:32 2011] Spatial fit model total counts = 240.279000, observed total counts = 236.000000
[Sun Oct 30 05:21:32 2011] Offset between fit and detection position for source 1 = 0.008316 pixels
[Sun Oct 30 05:21:32 2011] 239.944400 total counts/ 14.939400 bgd. counts: snr = 58.213752
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008316 pixels
  Position = (501.9, 603.7) = 8 51 3.83 11 46 30.0
  Extent = 1.4 (1.3-1.6)", rotation angle = 0
  Source counts = 225.0 +/- 15.5
  Background counts = 14.9
  Rate = 0.005 +/- 0.0003
[Sun Oct 30 05:21:32 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 05:21:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 05:21:32 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 05:21:32 2011] Source does appear to be extended
[Sun Oct 30 05:21:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 05:22:07 2011] Not overwriting source region fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 05:22:07 2011] Extracting stamp from image fullrun_ccd0_acisf01873_pi14-548_cl_sm2.00.img.gz, (436, 538) - (567, 669)
[Sun Oct 30 05:22:07 2011] Writing fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 05:22:08 2011] ../../acisf01873/products/events/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.evt and ../../acisf01873/products/events/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 05:22:08 2011] Size of ../../acisf01873/products/events/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.evt.gz[events] = 236 counts
[Sun Oct 30 05:22:08 2011] Mean chipx,y = (671.91, 530.34)
[Sun Oct 30 05:22:08 2011] Mean tdetx,y = (3591.34, 4460.09)
[Sun Oct 30 05:22:08 2011] chipx,y range = (647.00-695.00, 508.00-552.00)
[Sun Oct 30 05:22:08 2011] Size of ../../acisf01873/products/events/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 44 counts
[Sun Oct 30 05:22:08 2011] ../../acisf01873/products/images/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.img and ../../acisf01873/products/images/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 05:22:08 2011] ../../acisf01873/products/spectra/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.pi and ../../acisf01873/products/spectra/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 30 05:22:12 2011] ../../acisf01873/products/lightcurves/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.lc and ../../acisf01873/products/lightcurves/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 05:23:21 2011] Keeping rmf generated by specextract
[Sun Oct 30 05:23:21 2011] 189.687
[Sun Oct 30 05:28:50 2011] Updating aperture counts using extracted products
[Sun Oct 30 05:28:50 2011] Error reading totcts from fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 30 05:28:50 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:28:50 2011] Using photon index=1.80, rate=0.00486, arf fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:28:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:28:50 2011] Updating source flux to 5.6e-14
[Sun Oct 30 05:29:09 2011] Reading fit data from acisf01873/analysis//spectral/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 30 05:29:09 2011] Spectral fit parameter nH value = 1.74782e+20
[Sun Oct 30 05:29:09 2011] Spectral fit parameter PhoIndex value = 2.37744
[Sun Oct 30 05:29:09 2011] Failed to get F(0.3-8.0) from acisf01873/analysis//spectral/fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 05:29:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 05:29:09 2011] Using Nh = 1.7e+20, photon index=2.38, rate=0.00486, arf fullrun_ccd0_acisf01873_pi14-548_pass1_cl_src1.arf
[Sun Oct 30 05:29:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 05:29:09 2011] Updating source flux to 5.3e-14