[Fri Oct 28 21:41:51 2011] Detection parameters:
  Position = (1058.2, 253.1) = 5 46 11.62 -0 2 20.2
  Extent = 4.0" x 2.5", rotation angle = 63 degrees
  Source counts = 1062.2 +/- 34.7
  Background counts = 144.8
  Rate = 0.01 +/- 0.0004

[Fri Oct 28 21:41:52 2011] Off-axis axis estimate = 10.15'
[Fri Oct 28 21:43:16 2011] Using EEF radius (= 4.57 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:43:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 21:43:16 2011] Initial guess for spatial extent in simple fitting = 4.57"
[Fri Oct 28 21:43:16 2011] source mask rpix=9.3, npix_max = 382, mask sum = 400, frac = 1.044
[Fri Oct 28 21:43:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.57"
[Fri Oct 28 21:43:17 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 21:43:17 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 21:43:17 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 21:43:17 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 21:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:43:18 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 21:43:18 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 21:43:18 2011] Fit fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 21:43:39 2011] Spatial fit model total counts = 1258.230000, observed total counts = 1261.000000
[Fri Oct 28 21:43:39 2011] Offset between fit and detection position for source 30 = 0.948871 pixels
[Fri Oct 28 21:43:39 2011] 1258.042000 total counts/ 175.102000 bgd. counts: snr = 81.838723
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.948871 pixels
  Position = (1058.9, 253.7) = 5 46 11.61 -0 2 20.2
  Extent = 3.8 (3.6-4.0)", rotation angle = 0
  Source counts = 1082.9 +/- 35.5
  Background counts = 175.1
  Rate = 0.01 +/- 0.0004
[Fri Oct 28 21:43:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:43:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:43:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:43:39 2011] Source does appear to be extended
[Fri Oct 28 21:43:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:44:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 21:44:08 2011] Initial guess for spatial extent in simple fitting = 3.80"
[Fri Oct 28 21:44:08 2011] source mask rpix=7.7, npix_max = 270, mask sum = 272, frac = 1.006
[Fri Oct 28 21:44:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.80"
[Fri Oct 28 21:44:09 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 21:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 21:44:09 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 21:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 21:44:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:44:10 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 21:44:10 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 21:44:10 2011] Fit fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 21:44:29 2011] Spatial fit model total counts = 1224.000000, observed total counts = 1224.000000
[Fri Oct 28 21:44:29 2011] Offset between fit and detection position for source 30 = 0.092880 pixels
[Fri Oct 28 21:44:29 2011] 1223.311000 total counts/ 189.861000 bgd. counts: snr = 75.001783
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.092880 pixels
  Position = (1059.0, 253.7) = 5 46 11.61 -0 2 20.2
  Extent = 3.6 (3.4-3.8)", rotation angle = 0
  Source counts = 1033.5 +/- 35.0
  Background counts = 189.9
  Rate = 0.01 +/- 0.0004
[Fri Oct 28 21:44:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:44:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:44:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:44:29 2011] Source does appear to be extended
[Fri Oct 28 21:44:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:48:39 2011] Not overwriting source region fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.reg
[Fri Oct 28 21:48:39 2011] Extracting stamp from image fullrun_ccd3_acisf01872_pi14-548_cl_sm2.00.img.gz, (895, 90) - (1203, 417)
[Fri Oct 28 21:48:39 2011] Writing fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30.gif
[Fri Oct 28 21:48:40 2011] ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.evt and ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Oct 28 21:48:41 2011] Size of ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.evt.gz[events] = 1186 counts
[Fri Oct 28 21:48:41 2011] Mean chipx,y = (131.10, 84.15)
[Fri Oct 28 21:48:41 2011] Mean tdetx,y = (5047.85, 3192.10)
[Fri Oct 28 21:48:41 2011] chipx,y range = (88.00-172.00, 45.00-126.00)
[Fri Oct 28 21:48:41 2011] Size of ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 538 counts
[Fri Oct 28 21:48:41 2011] ../../acisf01872/products/images/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.img and ../../acisf01872/products/images/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Oct 28 21:48:41 2011] ../../acisf01872/products/spectra/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.pi and ../../acisf01872/products/spectra/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Oct 28 21:48:43 2011] ../../acisf01872/products/lightcurves/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.lc and ../../acisf01872/products/lightcurves/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Oct 28 21:50:24 2011] Keeping rmf generated by specextract
[Fri Oct 28 21:50:25 2011] 162.758
[Fri Oct 28 21:51:00 2011] Updating aperture counts using extracted products
[Fri Oct 28 21:51:00 2011] Error reading totcts from fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Oct 28 21:51:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:51:00 2011] Using photon index=1.80, rate=0.011, arf fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30.arf
[Fri Oct 28 21:51:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:51:01 2011] Updating source flux to 1.4e-13
[Fri Oct 28 21:53:08 2011] Reading fit data from acisf01872/analysis//spectral/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_pl.csv
[Fri Oct 28 21:53:08 2011] Spectral fit parameter nH value = 1.76298e+22
[Fri Oct 28 21:53:08 2011] Spectral fit parameter PhoIndex value = 3.00353
[Fri Oct 28 21:53:08 2011] Failed to get F(0.3-8.0) from acisf01872/analysis//spectral/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 21:53:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:53:08 2011] Using Nh = 1.8e+22, photon index=3.00, rate=0.011, arf fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src30.arf
[Fri Oct 28 21:53:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:53:08 2011] Updating source flux to 1.5e-13