[Fri Oct 28 21:41:50 2011] Detection parameters:
  Position = (584.4, 1051.3) = 5 46 27.16 0 4 12.5
  Extent = 0.9" x 0.6", rotation angle = 117 degrees
  Source counts = 27.8 +/- 5.5
  Background counts = 2.2
  Rate = 0.0003 +/- 6e-05

[Fri Oct 28 21:41:52 2011] Off-axis axis estimate = 4.27'
[Fri Oct 28 21:43:16 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:43:16 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Oct 28 21:43:16 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.125
[Fri Oct 28 21:43:16 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.91"
[Fri Oct 28 21:43:17 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16.ximg exists
[Fri Oct 28 21:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16.csv
[Fri Oct 28 21:43:17 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Oct 28 21:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16.csv
[Fri Oct 28 21:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01872_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:43:18 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Oct 28 21:43:18 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Oct 28 21:43:18 2011] Fit fullrun_ccd3_acisf01872_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Oct 28 21:43:39 2011] Spatial fit model total counts = 31.966900, observed total counts = 32.000000
[Fri Oct 28 21:43:39 2011] Offset between fit and detection position for source 14 = 0.797364 pixels
[Fri Oct 28 21:43:39 2011] 32.175300 total counts/ 6.791100 bgd. counts: snr = 9.740773
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.797364 pixels
  Position = (584.5, 1052.1) = 5 46 27.17 0 4 12.7
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 25.4 +/- 5.7
  Background counts = 6.8
  Rate = 0.0003 +/- 6e-05
[Fri Oct 28 21:43:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:43:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:43:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:43:39 2011] Source does appear to be extended
[Fri Oct 28 21:43:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:44:08 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 28 21:44:08 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.989
[Fri Oct 28 21:44:08 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.74"
[Fri Oct 28 21:44:09 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16.ximg exists
[Fri Oct 28 21:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16.csv
[Fri Oct 28 21:44:09 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Oct 28 21:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16.csv
[Fri Oct 28 21:44:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01872_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:44:10 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct 28 21:44:10 2011] fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct 28 21:44:10 2011] Fit fullrun_ccd3_acisf01872_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Oct 28 21:44:29 2011] Spatial fit model total counts = 31.917500, observed total counts = 32.000000
[Fri Oct 28 21:44:29 2011] Offset between fit and detection position for source 14 = 0.050289 pixels
[Fri Oct 28 21:44:29 2011] 31.892640 total counts/ 6.491540 bgd. counts: snr = 9.969621
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.050289 pixels
  Position = (584.5, 1052.1) = 5 46 27.17 0 4 12.7
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 25.4 +/- 5.6
  Background counts = 6.5
  Rate = 0.0003 +/- 6e-05
[Fri Oct 28 21:44:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:44:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:44:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:44:29 2011] Source does appear to be extended
[Fri Oct 28 21:44:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:48:39 2011] Not overwriting source region fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.reg
[Fri Oct 28 21:48:39 2011] Extracting stamp from image fullrun_ccd3_acisf01872_pi14-548_cl_sm2.00.img.gz, (551, 1018) - (618, 1086)
[Fri Oct 28 21:48:39 2011] Writing fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14.gif
[Fri Oct 28 21:49:24 2011] ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.evt and ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Oct 28 21:49:24 2011] Size of ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.evt.gz[events] = 28 counts
[Fri Oct 28 21:49:24 2011] Mean chipx,y = (451.93, 957.18)
[Fri Oct 28 21:49:24 2011] Mean tdetx,y = (4174.82, 3512.93)
[Fri Oct 28 21:49:24 2011] chipx,y range = (433.00-467.00, 940.00-977.00)
[Fri Oct 28 21:49:24 2011] Size of ../../acisf01872/products/events/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 21 counts
[Fri Oct 28 21:49:24 2011] ../../acisf01872/products/images/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.img and ../../acisf01872/products/images/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Oct 28 21:49:24 2011] ../../acisf01872/products/spectra/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.pi and ../../acisf01872/products/spectra/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Oct 28 21:49:24 2011] Not generating rmf since there are only 25 counts
[Fri Oct 28 21:49:27 2011] ../../acisf01872/products/lightcurves/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.lc and ../../acisf01872/products/lightcurves/fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Oct 28 21:50:25 2011] 189.928
[Fri Oct 28 21:51:00 2011] Updating aperture counts using extracted products
[Fri Oct 28 21:51:00 2011] Error reading totcts from fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Oct 28 21:51:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:51:01 2011] Using photon index=1.80, rate=0.00027, arf fullrun_ccd3_acisf01872_pi14-548_pass1_cl_src14.arf
[Fri Oct 28 21:51:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:51:01 2011] Updating source flux to 3e-15
[Fri Oct 28 21:52:47 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting