[Fri Oct 28 21:41:45 2011] Detection parameters:
  Position = (373.2, 128.4) = 5 46 40.19 0 5 1.8
  Extent = 0.5" x 0.5", rotation angle = 59 degrees
  Source counts = 599.2 +/- 24.7
  Background counts = 10.8
  Rate = 0.006 +/- 0.0003

[Fri Oct 28 21:41:49 2011] Off-axis axis estimate = 1.62'
[Fri Oct 28 21:43:13 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:43:13 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 28 21:43:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.309
[Fri Oct 28 21:43:13 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.40"
[Fri Oct 28 21:43:14 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 21:43:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 21:43:14 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 21:43:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 21:43:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:43:15 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 21:43:15 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 21:43:15 2011] Fit fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 21:43:36 2011] Spatial fit model total counts = 611.578000, observed total counts = 611.000000
[Fri Oct 28 21:43:36 2011] Offset between fit and detection position for source 3 = 0.681421 pixels
[Fri Oct 28 21:43:36 2011] 614.237900 total counts/ 44.894900 bgd. counts: snr = 84.971930
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.681421 pixels
  Position = (373.7, 128.9) = 5 46 40.19 0 5 1.8
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 569.3 +/- 24.8
  Background counts = 44.9
  Rate = 0.006 +/- 0.0003
[Fri Oct 28 21:43:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:43:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:43:36 2011] Source does appear to be extended
[Fri Oct 28 21:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:44:06 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct 28 21:44:06 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.129
[Fri Oct 28 21:44:06 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.45"
[Fri Oct 28 21:44:07 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 28 21:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 21:44:07 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 28 21:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 21:44:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01872_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:44:08 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 28 21:44:08 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 28 21:44:08 2011] Fit fullrun_ccd2_acisf01872_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 28 21:44:26 2011] Spatial fit model total counts = 613.582000, observed total counts = 613.000000
[Fri Oct 28 21:44:26 2011] Offset between fit and detection position for source 3 = 0.003094 pixels
[Fri Oct 28 21:44:26 2011] 614.561600 total counts/ 44.859600 bgd. counts: snr = 85.058956
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003094 pixels
  Position = (373.7, 128.9) = 5 46 40.19 0 5 1.8
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 569.7 +/- 24.8
  Background counts = 44.9
  Rate = 0.006 +/- 0.0003
[Fri Oct 28 21:44:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:44:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:44:26 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:44:26 2011] Source does appear to be extended
[Fri Oct 28 21:44:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:46:33 2011] Not overwriting source region fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 21:46:33 2011] Extracting stamp from image fullrun_ccd2_acisf01872_pi14-548_cl_sm2.00.img.gz, (353, 108) - (394, 149)
[Fri Oct 28 21:46:33 2011] Writing fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 21:46:47 2011] ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.evt and ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 21:46:47 2011] Size of ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.evt.gz[events] = 580 counts
[Fri Oct 28 21:46:47 2011] Mean chipx,y = (199.13, 940.49)
[Fri Oct 28 21:46:47 2011] Mean tdetx,y = (4001.49, 3886.87)
[Fri Oct 28 21:46:47 2011] chipx,y range = (185.00-221.00, 921.00-958.00)
[Fri Oct 28 21:46:47 2011] Size of ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 29 counts
[Fri Oct 28 21:46:47 2011] ../../acisf01872/products/images/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.img and ../../acisf01872/products/images/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 21:46:47 2011] ../../acisf01872/products/spectra/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.pi and ../../acisf01872/products/spectra/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 21:46:50 2011] ../../acisf01872/products/lightcurves/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.lc and ../../acisf01872/products/lightcurves/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 21:48:37 2011] Keeping rmf generated by specextract
[Fri Oct 28 21:48:37 2011] 200.29
[Fri Oct 28 21:50:59 2011] Updating aperture counts using extracted products
[Fri Oct 28 21:50:59 2011] Error reading totcts from fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 21:50:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:50:59 2011] Using photon index=1.80, rate=0.00606, arf fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 21:50:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:51:00 2011] Updating source flux to 6.4e-14