[Fri Oct 28 21:41:46 2011] Detection parameters:
  Position = (429.5, 223.6) = 5 46 38.34 0 5 48.6
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 217.9 +/- 14.9
  Background counts = 4.1
  Rate = 0.002 +/- 0.0002

[Fri Oct 28 21:41:49 2011] Off-axis axis estimate = 2.52'
[Fri Oct 28 21:43:13 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:43:13 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Oct 28 21:43:13 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.991
[Fri Oct 28 21:43:13 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.50"
[Fri Oct 28 21:43:14 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct 28 21:43:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 21:43:14 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct 28 21:43:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11.csv
[Fri Oct 28 21:43:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01872_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:43:15 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct 28 21:43:15 2011] fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct 28 21:43:15 2011] Fit fullrun_ccd2_acisf01872_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct 28 21:43:36 2011] Spatial fit model total counts = 224.000000, observed total counts = 224.000000
[Fri Oct 28 21:43:36 2011] Offset between fit and detection position for source 11 = 0.707015 pixels
[Fri Oct 28 21:43:36 2011] 224.772700 total counts/ 19.992700 bgd. counts: snr = 45.798559
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.707015 pixels
  Position = (430.0, 224.0) = 5 46 38.34 0 5 48.6
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 204.8 +/- 15.0
  Background counts = 20.0
  Rate = 0.002 +/- 0.0002
[Fri Oct 28 21:43:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:43:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:43:36 2011] Source does appear to be extended
[Fri Oct 28 21:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:44:06 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Oct 28 21:44:06 2011] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.488
[Fri Oct 28 21:44:06 2011] Skipping simple spatial due to low active detector fraction
[Fri Oct 28 21:44:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:44:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:44:26 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:44:26 2011] Source does appear to be extended
[Fri Oct 28 21:44:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:46:33 2011] Not overwriting source region fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 21:46:33 2011] Extracting stamp from image fullrun_ccd2_acisf01872_pi14-548_cl_sm2.00.img.gz, (409, 203) - (451, 245)
[Fri Oct 28 21:46:33 2011] Writing fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 21:47:04 2011] ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.evt and ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 21:47:04 2011] Size of ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.evt.gz[events] = 209 counts
[Fri Oct 28 21:47:04 2011] Mean chipx,y = (275.40, 855.45)
[Fri Oct 28 21:47:04 2011] Mean tdetx,y = (3916.45, 3810.60)
[Fri Oct 28 21:47:04 2011] chipx,y range = (258.00-293.00, 838.00-874.00)
[Fri Oct 28 21:47:04 2011] Size of ../../acisf01872/products/events/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Fri Oct 28 21:47:04 2011] ../../acisf01872/products/images/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.img and ../../acisf01872/products/images/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 21:47:04 2011] ../../acisf01872/products/spectra/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.pi and ../../acisf01872/products/spectra/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 21:47:07 2011] ../../acisf01872/products/lightcurves/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.lc and ../../acisf01872/products/lightcurves/fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 21:48:38 2011] Keeping rmf generated by specextract
[Fri Oct 28 21:48:38 2011] 194.613
[Fri Oct 28 21:50:59 2011] Updating aperture counts using extracted products
[Fri Oct 28 21:50:59 2011] Error reading totcts from fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 21:51:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:51:00 2011] Using photon index=1.80, rate=0.00218, arf fullrun_ccd2_acisf01872_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 21:51:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:51:00 2011] Updating source flux to 2.4e-14