[Fri Oct 28 21:41:40 2011] Detection parameters:
  Position = (431.1, 630.7) = 5 47 11.91 0 7 33.9
  Extent = 2.4" x 1.8", rotation angle = 4 degrees
  Source counts = 242.7 +/- 16.5
  Background counts = 28.3
  Rate = 0.003 +/- 0.0002

[Fri Oct 28 21:41:42 2011] Off-axis axis estimate = 7.93'
[Fri Oct 28 21:43:10 2011] Using EEF radius (= 2.78 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:43:10 2011] Initial guess for spatial extent in simple fitting = 2.78"
[Fri Oct 28 21:43:10 2011] source mask rpix=5.6, npix_max = 151, mask sum = 144, frac = 0.953
[Fri Oct 28 21:43:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.78"
[Fri Oct 28 21:43:11 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 21:43:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 21:43:11 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 21:43:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 21:43:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01872_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:43:12 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 21:43:12 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 21:43:12 2011] Fit fullrun_ccd0_acisf01872_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 21:43:28 2011] Spatial fit model total counts = 270.000000, observed total counts = 270.000000
[Fri Oct 28 21:43:28 2011] Offset between fit and detection position for source 3 = 0.455883 pixels
[Fri Oct 28 21:43:28 2011] 270.330800 total counts/ 24.747800 bgd. counts: snr = 49.366234
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.455883 pixels
  Position = (431.1, 631.1) = 5 47 11.93 0 7 33.9
  Extent = 2.6 (2.2-2.8)", rotation angle = 0
  Source counts = 245.6 +/- 16.4
  Background counts = 24.7
  Rate = 0.003 +/- 0.0002
[Fri Oct 28 21:43:28 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:43:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:43:28 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:43:28 2011] Source does appear to be extended
[Fri Oct 28 21:43:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 21:44:03 2011] Initial guess for spatial extent in simple fitting = 2.55"
[Fri Oct 28 21:44:03 2011] source mask rpix=5.2, npix_max = 129, mask sum = 144, frac = 1.114
[Fri Oct 28 21:44:03 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.55"
[Fri Oct 28 21:44:04 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 21:44:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 21:44:04 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 21:44:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 21:44:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01872_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 21:44:04 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 21:44:04 2011] fullrun_ccd0_acisf01872_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 21:44:04 2011] Fit fullrun_ccd0_acisf01872_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 21:44:19 2011] Spatial fit model total counts = 267.057000, observed total counts = 265.000000
[Fri Oct 28 21:44:19 2011] Offset between fit and detection position for source 3 = 0.381072 pixels
[Fri Oct 28 21:44:19 2011] 265.808800 total counts/ 25.527800 bgd. counts: snr = 47.556812
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.381072 pixels
  Position = (431.3, 631.5) = 5 47 11.92 0 7 34.1
  Extent = 2.5 (2.2-2.8)", rotation angle = 0
  Source counts = 240.3 +/- 16.3
  Background counts = 25.5
  Rate = 0.003 +/- 0.0002
[Fri Oct 28 21:44:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 21:44:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 21:44:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 21:44:19 2011] Source does appear to be extended
[Fri Oct 28 21:44:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 21:44:54 2011] Not overwriting source region fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 21:44:54 2011] Extracting stamp from image fullrun_ccd0_acisf01872_pi14-548_cl_sm2.00.img.gz, (319, 519) - (544, 744)
[Fri Oct 28 21:44:54 2011] Writing fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 21:45:01 2011] ../../acisf01872/products/events/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.evt and ../../acisf01872/products/events/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 21:45:01 2011] Size of ../../acisf01872/products/events/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.evt.gz[events] = 274 counts
[Fri Oct 28 21:45:01 2011] Mean chipx,y = (352.43, 455.04)
[Fri Oct 28 21:45:01 2011] Mean tdetx,y = (3516.04, 4779.57)
[Fri Oct 28 21:45:01 2011] chipx,y range = (321.00-385.00, 428.00-487.00)
[Fri Oct 28 21:45:01 2011] Size of ../../acisf01872/products/events/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 291 counts
[Fri Oct 28 21:45:01 2011] ../../acisf01872/products/images/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.img and ../../acisf01872/products/images/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 21:45:01 2011] ../../acisf01872/products/spectra/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.pi and ../../acisf01872/products/spectra/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 21:45:04 2011] ../../acisf01872/products/lightcurves/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.lc and ../../acisf01872/products/lightcurves/fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 21:45:54 2011] Keeping rmf generated by specextract
[Fri Oct 28 21:45:54 2011] 178.199
[Fri Oct 28 21:50:58 2011] Updating aperture counts using extracted products
[Fri Oct 28 21:50:58 2011] Error reading totcts from fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 21:50:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 21:50:58 2011] Using photon index=1.80, rate=0.00256, arf fullrun_ccd0_acisf01872_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 21:50:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 21:50:58 2011] Updating source flux to 3e-14