[Sun Oct 23 09:11:21 2011] Detection parameters:
  Position = (345.2, 854.7) = 4 31 30.15 18 5 30.8
  Extent = 0.5" x 0.5", rotation angle = 119 degrees
  Source counts = 27.1 +/- 5.3
  Background counts = 0.9
  Rate = 0.0003 +/- 7e-05

[Sun Oct 23 09:11:23 2011] Off-axis axis estimate = 2.66'
[Sun Oct 23 09:12:23 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:12:23 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Oct 23 09:12:23 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Sun Oct 23 09:12:23 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.52"
[Sun Oct 23 09:12:23 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 23 09:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10.csv
[Sun Oct 23 09:12:23 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 23 09:12:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10.csv
[Sun Oct 23 09:12:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01866_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:12:24 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 23 09:12:24 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 23 09:12:24 2011] Fit fullrun_ccd3_acisf01866_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 23 09:12:37 2011] Spatial fit model total counts = 30.701600, observed total counts = 30.000000
[Sun Oct 23 09:12:37 2011] Offset between fit and detection position for source 10 = 0.716171 pixels
[Sun Oct 23 09:12:37 2011] 30.435500 total counts/ 3.030600 bgd. counts: snr = 15.742145
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.716171 pixels
  Position = (345.9, 855.1) = 4 31 30.15 18 5 30.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 27.4 +/- 5.5
  Background counts = 3.0
  Rate = 0.0003 +/- 7e-05
[Sun Oct 23 09:12:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:12:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:12:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:12:37 2011] Source does appear to be extended
[Sun Oct 23 09:12:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:12:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 09:12:59 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Oct 23 09:12:59 2011] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.562
[Sun Oct 23 09:12:59 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.41"
[Sun Oct 23 09:13:00 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct 23 09:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10.csv
[Sun Oct 23 09:13:00 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct 23 09:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10.csv
[Sun Oct 23 09:13:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01866_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 09:13:00 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct 23 09:13:00 2011] fullrun_ccd3_acisf01866_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct 23 09:13:00 2011] Fit fullrun_ccd3_acisf01866_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Oct 23 09:13:11 2011] Spatial fit model total counts = 26.799800, observed total counts = 28.000000
[Sun Oct 23 09:13:11 2011] Offset between fit and detection position for source 10 = 0.008915 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.008915 pixels
  Position = (345.9, 855.1) = 4 31 30.15 18 5 30.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.8 +/- 5.2
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sun Oct 23 09:13:11 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 09:13:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 09:13:11 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 09:13:11 2011] Source does appear to be extended
[Sun Oct 23 09:13:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 09:19:39 2011] Not overwriting source region fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 23 09:19:39 2011] Extracting stamp from image fullrun_ccd3_acisf01866_pi14-548_cl_sm2.00.img.gz, (326, 836) - (365, 874)
[Sun Oct 23 09:19:39 2011] Writing fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10.gif
[Sun Oct 23 09:20:42 2011] ../../acisf01866/products/events/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.evt and ../../acisf01866/products/events/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 23 09:20:42 2011] Size of ../../acisf01866/products/events/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.evt.gz[events] = 27 counts
[Sun Oct 23 09:20:42 2011] Mean chipx,y = (827.26, 703.85)
[Sun Oct 23 09:20:42 2011] Mean tdetx,y = (4428.15, 3888.26)
[Sun Oct 23 09:20:42 2011] chipx,y range = (812.00-846.00, 687.00-721.00)
[Sun Oct 23 09:20:42 2011] Size of ../../acisf01866/products/events/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 4 counts
[Sun Oct 23 09:20:42 2011] ../../acisf01866/products/images/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.img and ../../acisf01866/products/images/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 23 09:20:42 2011] Not generating rmf since there are only 26 counts
[Sun Oct 23 09:20:42 2011] arf not found, will run specextract
[Sun Oct 23 09:20:43 2011] ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_bkg.pi not found
[Sun Oct 23 09:20:43 2011] ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10.warf not found
[Sun Oct 23 09:20:43 2011] ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10.wrmf not found
[Sun Oct 23 09:20:43 2011] Removal of ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10.soff failed
[Sun Oct 23 09:20:43 2011] Failed to rename ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_grp.pi to ../../acisf01866/products/spectra/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.pi
[Sun Oct 23 09:20:48 2011] ../../acisf01866/products/lightcurves/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.lc and ../../acisf01866/products/lightcurves/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 23 09:21:57 2011] No arf file found
[Sun Oct 23 09:22:09 2011] Updating aperture counts using extracted products
[Sun Oct 23 09:22:09 2011] Error reading totcts from fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_src.pi
[Sun Oct 23 09:22:09 2011] No arf file for this source, not re-computing flux
[Sun Oct 23 09:22:15 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 09:22:16 2011] acisf01866/analysis//spectral/fullrun_ccd3_acisf01866_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete