[Mon Oct 17 19:28:59 2011] Detection parameters:
  Position = (491.3, 506.2) = 17 0 38.71 -26 54 14.7
  Extent = 0.6" x 0.5", rotation angle = 12 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Mon Oct 17 19:28:59 2011] Off-axis axis estimate = 3.66'
[Mon Oct 17 19:29:53 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:29:53 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Mon Oct 17 19:29:53 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.006
[Mon Oct 17 19:29:53 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.74"
[Mon Oct 17 19:29:54 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18.ximg exists
[Mon Oct 17 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 19:29:54 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18_1.ximg exists
[Mon Oct 17 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 19:29:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01861_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:29:54 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon Oct 17 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon Oct 17 19:29:54 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Oct 17 19:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon Oct 17 19:29:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01861_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:30:06 2011] Spatial fit model total counts = 13.115800, observed total counts = 16.000000
[Mon Oct 17 19:30:06 2011] Offset between fit and detection position for source 21 = 0.607799 pixels
[Mon Oct 17 19:30:06 2011] 14.221820 total counts/ 2.291420 bgd. counts: snr = 7.881387
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.607799 pixels
  Position = (491.8, 506.6) = 17 0 38.72 -26 54 14.7
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 11.9 +/- 3.8
  Background counts = 2.3
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 19:30:06 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:30:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:30:06 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:30:06 2011] Source does appear to be extended
[Mon Oct 17 19:30:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:30:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:30:27 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Oct 17 19:30:27 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.894
[Mon Oct 17 19:30:27 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.66"
[Mon Oct 17 19:30:28 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass1_src18.ximg exists
[Mon Oct 17 19:30:28 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Oct 17 19:30:28 2011] Fit fullrun_ccd3_acisf01861_pi14-548_cl_pass1_src18 appears to have run properly
[Mon Oct 17 19:30:29 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Oct 17 19:30:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18.csv
[Mon Oct 17 19:30:29 2011] fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Oct 17 19:30:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18.csv
[Mon Oct 17 19:30:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01861_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:30:40 2011] Spatial fit model total counts = 12.145100, observed total counts = 16.000000
[Mon Oct 17 19:30:40 2011] Offset between fit and detection position for source 21 = 0.014683 pixels
[Mon Oct 17 19:30:40 2011] 13.494570 total counts/ 1.744170 bgd. counts: snr = 8.897300
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.014683 pixels
  Position = (491.8, 506.6) = 17 0 38.72 -26 54 14.7
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 11.8 +/- 3.7
  Background counts = 1.7
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 19:30:40 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:30:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:30:40 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:30:40 2011] Source does appear to be extended
[Mon Oct 17 19:30:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:35:03 2011] Not overwriting source region fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.reg
[Mon Oct 17 19:35:03 2011] Extracting stamp from image fullrun_ccd3_acisf01861_pi14-548_cl_sm2.00.img.gz, (463, 478) - (520, 535)
[Mon Oct 17 19:35:03 2011] Writing fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21.gif
[Mon Oct 17 19:37:01 2011] ../../acisf01861/products/events/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.evt and ../../acisf01861/products/events/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Mon Oct 17 19:37:01 2011] Size of ../../acisf01861/products/events/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.evt.gz[events] = 13 counts
[Mon Oct 17 19:37:01 2011] Mean chipx,y = (443.08, 580.08)
[Mon Oct 17 19:37:01 2011] Mean tdetx,y = (4551.92, 3504.08)
[Mon Oct 17 19:37:01 2011] chipx,y range = (424.00-456.00, 561.00-591.00)
[Mon Oct 17 19:37:01 2011] Size of ../../acisf01861/products/events/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 15 counts
[Mon Oct 17 19:37:01 2011] ../../acisf01861/products/images/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.img and ../../acisf01861/products/images/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Mon Oct 17 19:37:01 2011] Not generating rmf since there are only 11 counts
[Mon Oct 17 19:37:01 2011] arf not found, will run specextract
[Mon Oct 17 19:37:03 2011] ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_bkg.pi not found
[Mon Oct 17 19:37:03 2011] ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21.warf not found
[Mon Oct 17 19:37:03 2011] ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21.wrmf not found
[Mon Oct 17 19:37:03 2011] Removal of ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21.soff failed
[Mon Oct 17 19:37:03 2011] Failed to rename ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_grp.pi to ../../acisf01861/products/spectra/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.pi
[Mon Oct 17 19:37:08 2011] ../../acisf01861/products/lightcurves/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.lc and ../../acisf01861/products/lightcurves/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Mon Oct 17 19:38:39 2011] No arf file found
[Mon Oct 17 19:39:26 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:39:26 2011] Error reading totcts from fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_src.pi
[Mon Oct 17 19:39:26 2011] No arf file for this source, not re-computing flux
[Mon Oct 17 19:39:32 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 19:39:33 2011] acisf01861/analysis//spectral/fullrun_ccd3_acisf01861_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete