[Mon Feb 20 12:35:16 2012] Detection parameters:
  Position = (373.2, 223.2) = 5 35 5.62 -5 29 22.5
  Extent = 2.0" x 1.2", rotation angle = 48 degrees
  Source counts = 177.9 +/- 14.1
  Background counts = 20.1
  Rate = 0.004 +/- 0.0003

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 6.79'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 2.06 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 2.06"
[Mon Feb 20 19:31:38 2012] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.925
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 2.06"
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74.csv
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74_1.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74.csv
[Mon Feb 20 21:23:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src74.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src74_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src74 appears to have run properly
[Mon Feb 20 23:30:02 2012] Spatial fit model total counts = 194.437000, observed total counts = 195.000000
[Mon Feb 20 23:30:02 2012] Offset between fit and detection position for source 60 = 1.821954 pixels
[Mon Feb 20 23:30:02 2012] 193.347200 total counts/ 21.411200 bgd. counts: snr = 37.157485
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.821954 pixels
  Position = (374.4, 224.6) = 5 35 5.60 -5 29 22.0
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 171.9 +/- 13.9
  Background counts = 21.4
  Rate = 0.004 +/- 0.0003
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 1.83"
[Tue Feb 21 06:03:27 2012] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.138
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 1.83"
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71.csv
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71_1.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71.csv
[Tue Feb 21 07:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 186.835000, observed total counts = 187.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 60 = 0.298055 pixels
[Tue Feb 21 10:27:43 2012] 186.776600 total counts/ 27.072600 bgd. counts: snr = 30.693811
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.298055 pixels
  Position = (374.1, 224.5) = 5 35 5.61 -5 29 22.1
  Extent = 1.7 (1.3-2.1)", rotation angle = 0
  Source counts = 159.7 +/- 13.7
  Background counts = 27.1
  Rate = 0.003 +/- 0.0003
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:38 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_src.reg
[Tue Feb 21 12:34:38 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (296, 146) - (452, 303)
[Tue Feb 21 12:34:38 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60.gif
[Tue Feb 21 12:53:45 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_src.evt.gz[events] = 190 counts
[Tue Feb 21 12:53:45 2012] Mean chipx,y = (810.74, 180.17)
[Tue Feb 21 12:53:45 2012] Mean tdetx,y = (4951.83, 3871.74)
[Tue Feb 21 12:53:45 2012] chipx,y range = (787.00-835.00, 157.00-206.00)
[Tue Feb 21 12:53:45 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_bgd.evt.gz[events] = 144 counts
[Tue Feb 21 12:53:46 2012] rmf not found, will run specextract
[Tue Feb 21 12:53:46 2012] arf not found, will run specextract
[Tue Feb 21 12:53:52 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_bkg.pi not found
[Tue Feb 21 12:53:52 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60.warf not found
[Tue Feb 21 12:53:52 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60.wrmf not found
[Tue Feb 21 12:53:52 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60.soff failed
[Tue Feb 21 12:53:52 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_src.pi
[Tue Feb 21 13:16:40 2012] 188.945
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_src.pi
[Tue Feb 21 13:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:38 2012] Using photon index=1.80, rate=0.00343, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60.arf
[Tue Feb 21 13:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:38 2012] Updating source flux to 3.7e-14
[Tue Feb 21 13:22:00 2012] Source 60 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete