[Mon Feb 20 12:35:16 2012] Detection parameters:
  Position = (402.8, 195.5) = 5 35 4.65 -5 29 36.1
  Extent = 2.0" x 1.3", rotation angle = 53 degrees
  Source counts = 185.5 +/- 14.6
  Background counts = 26.5
  Rate = 0.004 +/- 0.0003

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 7.09'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 2.24"
[Mon Feb 20 19:31:38 2012] source mask rpix=4.5, npix_max = 101, mask sum = 110, frac = 1.081
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 2.24"
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72.csv
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72_1.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72.csv
[Mon Feb 20 21:23:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src72.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src72 appears to have run properly
[Mon Feb 20 23:30:02 2012] Spatial fit model total counts = 211.413000, observed total counts = 212.000000
[Mon Feb 20 23:30:02 2012] Offset between fit and detection position for source 58 = 0.943083 pixels
[Mon Feb 20 23:30:02 2012] 211.685700 total counts/ 36.903700 bgd. counts: snr = 28.771450
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.943083 pixels
  Position = (403.2, 196.4) = 5 35 4.65 -5 29 35.9
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 174.8 +/- 14.5
  Background counts = 36.9
  Rate = 0.004 +/- 0.0003
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 1.77"
[Tue Feb 21 06:03:27 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.954
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 1.77"
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69.csv
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69_1.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69.csv
[Tue Feb 21 07:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src69.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 198.576000, observed total counts = 199.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 58 = 0.082606 pixels
[Tue Feb 21 10:27:43 2012] 198.853400 total counts/ 39.209400 bgd. counts: snr = 25.495146
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.082606 pixels
  Position = (403.1, 196.5) = 5 35 4.66 -5 29 35.9
  Extent = 1.7 (1.4-2.0)", rotation angle = 0
  Source counts = 159.6 +/- 14.1
  Background counts = 39.2
  Rate = 0.003 +/- 0.0003
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:37 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_src.reg
[Tue Feb 21 12:34:37 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (327, 120) - (479, 273)
[Tue Feb 21 12:34:38 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58.gif
[Tue Feb 21 12:53:13 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_src.evt.gz[events] = 201 counts
[Tue Feb 21 12:53:13 2012] Mean chipx,y = (786.90, 148.28)
[Tue Feb 21 12:53:13 2012] Mean tdetx,y = (4983.72, 3847.91)
[Tue Feb 21 12:53:13 2012] chipx,y range = (761.00-815.00, 122.00-168.00)
[Tue Feb 21 12:53:13 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_bgd.evt.gz[events] = 139 counts
[Tue Feb 21 12:53:15 2012] rmf not found, will run specextract
[Tue Feb 21 12:53:15 2012] arf not found, will run specextract
[Tue Feb 21 12:53:20 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_bkg.pi not found
[Tue Feb 21 12:53:20 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58.warf not found
[Tue Feb 21 12:53:20 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58.wrmf not found
[Tue Feb 21 12:53:20 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58.soff failed
[Tue Feb 21 12:53:20 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_src.pi
[Tue Feb 21 13:16:40 2012] 165.596
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_src.pi
[Tue Feb 21 13:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:38 2012] Using photon index=1.80, rate=0.00343, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58.arf
[Tue Feb 21 13:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:38 2012] Updating source flux to 4.2e-14
[Tue Feb 21 13:22:00 2012] Source 58 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete