[Mon Feb 20 12:35:16 2012] Detection parameters:
  Position = (453.2, 143.7) = 5 35 2.99 -5 30 1.6
  Extent = 1.7" x 1.1", rotation angle = 52 degrees
  Source counts = 1293.8 +/- 37.1
  Background counts = 82.2
  Rate = 0.03 +/- 0.0008

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 7.65'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Mon Feb 20 19:31:38 2012] source mask rpix=5.3, npix_max = 132, mask sum = 144, frac = 1.084
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 2.59"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Feb 20 23:30:01 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 29.830459 pixels away
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.57
[Mon Feb 20 23:30:02 2012] Source is asymmetric
[Tue Feb 21 06:03:27 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Tue Feb 21 06:03:27 2012] source mask rpix=5.3, npix_max = 132, mask sum = 144, frac = 1.084
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 2.59"
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12.csv
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12.csv
[Tue Feb 21 07:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 1335.730000, observed total counts = 1341.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 53 = 0.723034 pixels
[Tue Feb 21 10:27:43 2012] 1335.608000 total counts/ 172.958000 bgd. counts: snr = 88.405375
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.723034 pixels
  Position = (453.6, 144.3) = 5 35 2.99 -5 30 1.6
  Extent = 2.0 (1.9-2.1)", rotation angle = 0
  Source counts = 1162.7 +/- 36.5
  Background counts = 173.0
  Rate = 0.02 +/- 0.0008
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:34 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_src.reg
[Tue Feb 21 12:34:34 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (364, 55) - (543, 234)
[Tue Feb 21 12:34:35 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53.gif
[Tue Feb 21 12:37:54 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_src.evt.gz[events] = 1317 counts
[Tue Feb 21 12:37:54 2012] Mean chipx,y = (745.65, 87.42)
[Tue Feb 21 12:37:54 2012] Mean tdetx,y = (5044.58, 3806.65)
[Tue Feb 21 12:37:54 2012] chipx,y range = (718.00-774.00, 59.00-115.00)
[Tue Feb 21 12:37:54 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_bgd.evt.gz[events] = 236 counts
[Tue Feb 21 12:37:56 2012] rmf not found, will run specextract
[Tue Feb 21 12:37:56 2012] arf not found, will run specextract
[Tue Feb 21 12:38:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_bkg.pi not found
[Tue Feb 21 12:38:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53.warf not found
[Tue Feb 21 12:38:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53.wrmf not found
[Tue Feb 21 12:38:02 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53.soff failed
[Tue Feb 21 12:38:02 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_src.pi
[Tue Feb 21 13:16:39 2012] 184.045
[Tue Feb 21 13:21:34 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:34 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_src.pi
[Tue Feb 21 13:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:37 2012] Using photon index=1.80, rate=0.025, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53.arf
[Tue Feb 21 13:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:37 2012] Updating source flux to 2.7e-13
[Tue Feb 21 13:22:00 2012] Source 53 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete