[Mon Feb 20 12:35:15 2012] Detection parameters:
  Position = (541.3, 996.5) = 5 35 0.09 -5 23 2.0
  Extent = 0.5" x 0.5", rotation angle = 154 degrees
  Source counts = 404.4 +/- 20.2
  Background counts = 5.6
  Rate = 0.009 +/- 0.0004

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 3.88'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Mon Feb 20 19:31:38 2012] source mask rpix=1.6, npix_max = 17, mask sum = 10, frac = 0.558
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 0.80"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Feb 20 23:30:01 2012] Spatial fit model total counts = 503.334000, observed total counts = 506.000000
[Mon Feb 20 23:30:01 2012] Offset between fit and detection position for source 49 = 0.405681 pixels
[Mon Feb 20 23:30:01 2012] 503.528700 total counts/ 17.747700 bgd. counts: snr = 115.310667
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.405681 pixels
  Position = (541.4, 996.9) = 5 35 0.10 -5 23 2.1
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 485.8 +/- 22.4
  Background counts = 17.7
  Rate = 0.01 +/- 0.0005
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Tue Feb 21 06:03:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 8, frac = 0.492
[Tue Feb 21 06:03:27 2012] Skipping simple spatial due to low active detector fraction
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:36 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_src.reg
[Tue Feb 21 12:34:36 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (507, 963) - (576, 1031)
[Tue Feb 21 12:34:36 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49.gif
[Tue Feb 21 12:44:42 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_src.evt.gz[events] = 499 counts
[Tue Feb 21 12:44:42 2012] Mean chipx,y = (510.59, 913.26)
[Tue Feb 21 12:44:42 2012] Mean tdetx,y = (4218.74, 3571.59)
[Tue Feb 21 12:44:42 2012] chipx,y range = (490.00-530.00, 894.00-934.00)
[Tue Feb 21 12:44:42 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 42 counts
[Tue Feb 21 12:44:43 2012] rmf not found, will run specextract
[Tue Feb 21 12:44:43 2012] arf not found, will run specextract
[Tue Feb 21 12:44:49 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_bkg.pi not found
[Tue Feb 21 12:44:49 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49.warf not found
[Tue Feb 21 12:44:49 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49.wrmf not found
[Tue Feb 21 12:44:49 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49.soff failed
[Tue Feb 21 12:44:49 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_src.pi
[Tue Feb 21 13:16:40 2012] 176.144
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_src.pi
[Tue Feb 21 13:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:37 2012] Using photon index=1.80, rate=0.0104, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49.arf
[Tue Feb 21 13:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:37 2012] Updating source flux to 1.1e-13
[Tue Feb 21 13:22:00 2012] Source 49 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete