[Mon Feb 20 12:35:15 2012] Detection parameters:
  Position = (56.1, 986.3) = 5 35 16.07 -5 23 7.1
  Extent = 0.5" x 0.5", rotation angle = 159 degrees
  Source counts = 938.8 +/- 33.3
  Background counts = 173.2
  Rate = 0.02 +/- 0.0007

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 0.11'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Feb 20 19:31:38 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.820
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.42"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Feb 20 23:30:01 2012] Spatial fit model total counts = 1694.790000, observed total counts = 1724.000000
[Mon Feb 20 23:30:01 2012] Offset between fit and detection position for source 48 = 0.631796 pixels
[Mon Feb 20 23:30:01 2012] 1714.394000 total counts/ 824.095000 bgd. counts: snr = 31.013248
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.631796 pixels
  Position = (56.5, 986.8) = 5 35 16.08 -5 23 7.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 890.3 +/- 41.4
  Background counts = 824.1
  Rate = 0.02 +/- 0.0009
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Feb 21 06:03:27 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.126
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.45"
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18.csv
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18_1.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18.csv
[Tue Feb 21 07:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 1555.460000, observed total counts = 1630.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 48 = 0.007112 pixels
[Tue Feb 21 10:27:43 2012] 1565.871000 total counts/ 666.485000 bgd. counts: snr = 34.837817
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.007112 pixels
  Position = (56.5, 986.8) = 5 35 16.08 -5 23 7.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 899.4 +/- 39.6
  Background counts = 666.5
  Rate = 0.02 +/- 0.0009
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:35 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_src.reg
[Tue Feb 21 12:34:35 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (36, 966) - (77, 1007)
[Tue Feb 21 12:34:35 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48.gif
[Tue Feb 21 12:39:29 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_src.evt.gz[events] = 1039 counts
[Tue Feb 21 12:39:29 2012] Mean chipx,y = (990.89, 989.72)
[Tue Feb 21 12:39:29 2012] Mean tdetx,y = (4142.28, 4051.89)
[Tue Feb 21 12:39:29 2012] chipx,y range = (971.00-1011.00, 970.00-1009.00)
[Tue Feb 21 12:39:29 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_bgd.evt.gz[events] = 987 counts
[Tue Feb 21 12:39:30 2012] rmf not found, will run specextract
[Tue Feb 21 12:39:30 2012] arf not found, will run specextract
[Tue Feb 21 12:39:36 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_bkg.pi not found
[Tue Feb 21 12:39:36 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48.warf not found
[Tue Feb 21 12:39:36 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48.wrmf not found
[Tue Feb 21 12:39:36 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48.soff failed
[Tue Feb 21 12:39:36 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_src.pi
[Tue Feb 21 13:16:40 2012] 197.586
[Tue Feb 21 13:21:34 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:34 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_src.pi
[Tue Feb 21 13:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:37 2012] Using photon index=1.80, rate=0.0193, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48.arf
[Tue Feb 21 13:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:37 2012] Updating source flux to 1.9e-13
[Tue Feb 21 13:22:00 2012] Source 48 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete