[Mon Feb 20 12:35:15 2012] Detection parameters:
  Position = (90.4, 920.8) = 5 35 14.95 -5 23 39.3
  Extent = 0.5" x 0.5", rotation angle = 154 degrees
  Source counts = 914.2 +/- 31.3
  Background counts = 64.8
  Rate = 0.02 +/- 0.0007

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 0.62'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Feb 20 19:31:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 0.39"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Feb 20 23:30:01 2012] Spatial fit model total counts = 1020.970000, observed total counts = 1019.000000
[Mon Feb 20 23:30:01 2012] Offset between fit and detection position for source 44 = 0.726454 pixels
[Mon Feb 20 23:30:01 2012] 1023.075000 total counts/ 130.020000 bgd. counts: snr = 78.320081
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.726454 pixels
  Position = (90.9, 921.3) = 5 35 14.94 -5 23 39.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 893.1 +/- 32.0
  Background counts = 130.0
  Rate = 0.02 +/- 0.0007
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Feb 21 06:03:27 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.868
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 0.40"
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19.csv
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19_1.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19.csv
[Tue Feb 21 07:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 1023.970000, observed total counts = 1022.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 44 = 0.001081 pixels
[Tue Feb 21 10:27:43 2012] 1024.161000 total counts/ 130.960000 bgd. counts: snr = 78.051251
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.001081 pixels
  Position = (90.9, 921.3) = 5 35 14.94 -5 23 39.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 893.2 +/- 32.0
  Background counts = 131.0
  Rate = 0.02 +/- 0.0007
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:35 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_src.reg
[Tue Feb 21 12:34:35 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (73, 903) - (109, 940)
[Tue Feb 21 12:34:35 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44.gif
[Tue Feb 21 12:39:44 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_src.evt.gz[events] = 920 counts
[Tue Feb 21 12:39:44 2012] Mean chipx,y = (968.51, 919.21)
[Tue Feb 21 12:39:44 2012] Mean tdetx,y = (4212.79, 4029.51)
[Tue Feb 21 12:39:44 2012] chipx,y range = (949.00-988.00, 900.00-938.00)
[Tue Feb 21 12:39:44 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_bgd.evt.gz[events] = 113 counts
[Tue Feb 21 12:39:45 2012] rmf not found, will run specextract
[Tue Feb 21 12:39:45 2012] arf not found, will run specextract
[Tue Feb 21 12:39:51 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_bkg.pi not found
[Tue Feb 21 12:39:51 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44.warf not found
[Tue Feb 21 12:39:51 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44.wrmf not found
[Tue Feb 21 12:39:51 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44.soff failed
[Tue Feb 21 12:39:51 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_src.pi
[Tue Feb 21 13:16:40 2012] 196.938
[Tue Feb 21 13:21:34 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:34 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_src.pi
[Tue Feb 21 13:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:37 2012] Using photon index=1.80, rate=0.0192, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44.arf
[Tue Feb 21 13:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:37 2012] Updating source flux to 1.9e-13
[Tue Feb 21 13:22:00 2012] Source 44 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete