[Mon Feb 20 12:35:23 2012] Detection parameters:
  Position = (1069.7, 315.5) = 5 34 42.68 -5 28 37.0
  Extent = 5.1" x 2.9", rotation angle = 75 degrees
  Source counts = 278.5 +/- 19.0
  Background counts = 82.5
  Rate = 0.006 +/- 0.0004

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 9.92'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 4.35 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 4.35"
[Mon Feb 20 19:31:38 2012] source mask rpix=8.9, npix_max = 349, mask sum = 361, frac = 1.032
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 4.35"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly
[Mon Feb 20 23:30:01 2012] Spatial fit model total counts = 345.954000, observed total counts = 348.000000
[Mon Feb 20 23:30:01 2012] Offset between fit and detection position for source 212 = 0.690931 pixels
[Mon Feb 20 23:30:01 2012] 346.016000 total counts/ 128.962000 bgd. counts: snr = 19.113354
Spatial fit parameters:
  Offset between fit and detection position for source 212 = 0.690931 pixels
  Position = (1069.2, 316.0) = 5 34 42.71 -5 28 37.0
  Extent = 2.9 (2.6-3.3)", rotation angle = 0
  Source counts = 217.1 +/- 18.6
  Background counts = 129.0
  Rate = 0.005 +/- 0.0004
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 2.91"
[Tue Feb 21 06:03:27 2012] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.947
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 2.91"
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53.csv
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53_1.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53.csv
[Tue Feb 21 07:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 274.297000, observed total counts = 275.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 212 = 0.293505 pixels
[Tue Feb 21 10:27:43 2012] 274.914600 total counts/ 86.337600 bgd. counts: snr = 20.294985
Spatial fit parameters:
  Offset between fit and detection position for source 212 = 0.293505 pixels
  Position = (1069.0, 315.8) = 5 34 42.72 -5 28 37.1
  Extent = 2.6 (2.0-3.2)", rotation angle = 0
  Source counts = 188.6 +/- 16.6
  Background counts = 86.3
  Rate = 0.004 +/- 0.0004
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:37 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_src.reg
[Tue Feb 21 12:34:37 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (950, 197) - (1187, 434)
[Tue Feb 21 12:34:37 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212.gif
[Tue Feb 21 12:48:54 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_src.evt.gz[events] = 284 counts
[Tue Feb 21 12:48:54 2012] Mean chipx,y = (108.43, 148.69)
[Tue Feb 21 12:48:54 2012] Mean tdetx,y = (4983.31, 3169.43)
[Tue Feb 21 12:48:54 2012] chipx,y range = (76.00-132.00, 117.00-181.00)
[Tue Feb 21 12:48:54 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_bgd.evt.gz[events] = 366 counts
[Tue Feb 21 12:48:56 2012] rmf not found, will run specextract
[Tue Feb 21 12:48:56 2012] arf not found, will run specextract
[Tue Feb 21 12:49:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_bkg.pi not found
[Tue Feb 21 12:49:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212.warf not found
[Tue Feb 21 12:49:02 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212.wrmf not found
[Tue Feb 21 12:49:02 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212.soff failed
[Tue Feb 21 12:49:02 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_src.pi
[Tue Feb 21 13:16:40 2012] 168.27
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_src.pi
[Tue Feb 21 13:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:38 2012] Using photon index=1.80, rate=0.00405, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212.arf
[Tue Feb 21 13:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:38 2012] Updating source flux to 4.7e-14
[Tue Feb 21 13:22:00 2012] Source 212 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src212_pl.csv not found, spectral fit skipped or did not complete