[Mon Feb 20 12:35:23 2012] Detection parameters:
  Position = (776.3, 132.6) = 5 34 52.34 -5 30 7.0
  Extent = 2.8" x 2.0", rotation angle = 51 degrees
  Source counts = 131.3 +/- 12.6
  Background counts = 28.7
  Rate = 0.003 +/- 0.0003

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 9.14'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 3.69"
[Mon Feb 20 19:31:38 2012] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.999
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 3.69"
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83.csv
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83_1.ximg exists
[Mon Feb 20 21:23:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83.csv
[Mon Feb 20 21:23:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src83.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src83_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src83 appears to have run properly
[Mon Feb 20 23:30:02 2012] Spatial fit model total counts = 163.587000, observed total counts = 164.000000
[Mon Feb 20 23:30:02 2012] Offset between fit and detection position for source 198 = 1.714349 pixels
[Mon Feb 20 23:30:02 2012] 163.451400 total counts/ 37.244400 bgd. counts: snr = 20.680115
Spatial fit parameters:
  Offset between fit and detection position for source 198 = 1.714349 pixels
  Position = (778.0, 133.1) = 5 34 52.30 -5 30 7.0
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 126.2 +/- 12.8
  Background counts = 37.2
  Rate = 0.003 +/- 0.0003
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 2.32"
[Tue Feb 21 06:03:27 2012] source mask rpix=4.7, npix_max = 108, mask sum = 100, frac = 0.923
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 2.32"
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80.csv
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80_1.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80.csv
[Tue Feb 21 07:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:46 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src80.ximg exists
[Tue Feb 21 07:50:46 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src80_1.ximg exists
[Tue Feb 21 07:50:46 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src80 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 144.992000, observed total counts = 145.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 198 = 0.378551 pixels
[Tue Feb 21 10:27:43 2012] 145.136600 total counts/ 40.035600 bgd. counts: snr = 16.610537
Spatial fit parameters:
  Offset between fit and detection position for source 198 = 0.378551 pixels
  Position = (777.9, 132.8) = 5 34 52.31 -5 30 7.2
  Extent = 1.9 (1.6-2.4)", rotation angle = 0
  Source counts = 105.1 +/- 12.0
  Background counts = 40.0
  Rate = 0.002 +/- 0.0003
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:38 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_src.reg
[Tue Feb 21 12:34:38 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (690, 45) - (866, 221)
[Tue Feb 21 12:34:38 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198.gif
[Tue Feb 21 12:56:10 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_src.evt.gz[events] = 140 counts
[Tue Feb 21 12:56:10 2012] Mean chipx,y = (428.29, 23.61)
[Tue Feb 21 12:56:10 2012] Mean tdetx,y = (5108.39, 3489.29)
[Tue Feb 21 12:56:10 2012] chipx,y range = (398.00-453.00, 6.00-47.00)
[Tue Feb 21 12:56:10 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_bgd.evt.gz[events] = 109 counts
[Tue Feb 21 12:56:11 2012] rmf not found, will run specextract
[Tue Feb 21 12:56:11 2012] arf not found, will run specextract
[Tue Feb 21 12:56:17 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_bkg.pi not found
[Tue Feb 21 12:56:17 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198.warf not found
[Tue Feb 21 12:56:17 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198.wrmf not found
[Tue Feb 21 12:56:17 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198.soff failed
[Tue Feb 21 12:56:17 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_src.pi
[Tue Feb 21 13:16:40 2012] 161.584
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_src.pi
[Tue Feb 21 13:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:38 2012] Using photon index=1.80, rate=0.00226, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198.arf
[Tue Feb 21 13:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:38 2012] Updating source flux to 2.8e-14
[Tue Feb 21 13:22:00 2012] Source 198 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src198_pl.csv not found, spectral fit skipped or did not complete