[Mon Feb 20 12:35:20 2012] Detection parameters:
  Position = (133.5, 937.7) = 5 35 13.52 -5 23 30.9
  Extent = 0.5" x 0.5", rotation angle = 6 degrees
  Source counts = 244.6 +/- 16.1
  Background counts = 14.4
  Rate = 0.005 +/- 0.0003

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 0.70'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 20 19:31:38 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.370
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 0.38"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src59.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src59 appears to have run properly
[Mon Feb 20 23:30:01 2012] Spatial fit model total counts = 289.719000, observed total counts = 289.000000
[Mon Feb 20 23:30:01 2012] Offset between fit and detection position for source 148 = 0.718209 pixels
[Mon Feb 20 23:30:01 2012] 289.790000 total counts/ 38.151000 bgd. counts: snr = 40.740372
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.718209 pixels
  Position = (134.1, 938.2) = 5 35 13.52 -5 23 30.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 251.6 +/- 17.0
  Background counts = 38.2
  Rate = 0.005 +/- 0.0004
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 0.37"
[Tue Feb 21 06:03:27 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.633
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 0.37"
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56.csv
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56_1.ximg exists
[Tue Feb 21 07:50:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56.csv
[Tue Feb 21 07:50:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src56 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 286.688000, observed total counts = 286.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 148 = 0.000368 pixels
[Tue Feb 21 10:27:43 2012] 286.767600 total counts/ 34.833600 bgd. counts: snr = 42.686211
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.000368 pixels
  Position = (134.1, 938.2) = 5 35 13.52 -5 23 30.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 251.9 +/- 16.9
  Background counts = 34.8
  Rate = 0.005 +/- 0.0004
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:37 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_src.reg
[Tue Feb 21 12:34:37 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (117, 921) - (151, 955)
[Tue Feb 21 12:34:37 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148.gif
[Tue Feb 21 12:49:43 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_src.evt.gz[events] = 256 counts
[Tue Feb 21 12:49:43 2012] Mean chipx,y = (923.76, 928.47)
[Tue Feb 21 12:49:43 2012] Mean tdetx,y = (4203.53, 3984.76)
[Tue Feb 21 12:49:43 2012] chipx,y range = (905.00-941.00, 910.00-945.00)
[Tue Feb 21 12:49:43 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_bgd.evt.gz[events] = 51 counts
[Tue Feb 21 12:49:44 2012] rmf not found, will run specextract
[Tue Feb 21 12:49:44 2012] arf not found, will run specextract
[Tue Feb 21 12:49:50 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_bkg.pi not found
[Tue Feb 21 12:49:50 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148.warf not found
[Tue Feb 21 12:49:50 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148.wrmf not found
[Tue Feb 21 12:49:50 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148.soff failed
[Tue Feb 21 12:49:50 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_src.pi
[Tue Feb 21 13:16:40 2012] 196.416
[Tue Feb 21 13:21:35 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:35 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_src.pi
[Tue Feb 21 13:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:38 2012] Using photon index=1.80, rate=0.00541, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148.arf
[Tue Feb 21 13:21:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:38 2012] Updating source flux to 5.4e-14
[Tue Feb 21 13:22:00 2012] Source 148 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src148_pl.csv not found, spectral fit skipped or did not complete