[Mon Feb 20 12:35:12 2012] Detection parameters:
  Position = (611.8, 894.2) = 5 34 57.77 -5 23 52.3
  Extent = 0.8" x 0.5", rotation angle = 75 degrees
  Source counts = 1736.2 +/- 42.0
  Background counts = 25.8
  Rate = 0.04 +/- 0.0009

[Mon Feb 20 12:35:27 2012] Off-axis axis estimate = 4.53'
[Mon Feb 20 19:31:38 2012] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:31:38 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Feb 20 19:31:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.968
[Mon Feb 20 19:31:38 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 1.00"
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12.csv
[Mon Feb 20 21:23:58 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Feb 20 21:23:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12.csv
[Mon Feb 20 21:23:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Feb 20 21:23:59 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Feb 20 21:23:59 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Feb 20 23:30:01 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.689634 pixels away
[Mon Feb 20 23:30:02 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:30:02 2012] Assessing source extent using major
[Mon Feb 20 23:30:02 2012] Source does appear to be extended
[Mon Feb 20 23:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.59
[Mon Feb 20 23:30:02 2012] Source is asymmetric
[Tue Feb 21 06:03:27 2012] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:03:27 2012] Initial guess for spatial extent in simple fitting = 1.00"
[Tue Feb 21 06:03:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.968
[Tue Feb 21 06:03:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 1.00"
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11.csv
[Tue Feb 21 07:50:44 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Feb 21 07:50:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11.csv
[Tue Feb 21 07:50:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00018_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 21 07:50:45 2012] fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 21 07:50:45 2012] Fit fullrun_ccd3_acisf00018_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Feb 21 10:27:43 2012] Spatial fit model total counts = 1726.610000, observed total counts = 1727.000000
[Tue Feb 21 10:27:43 2012] Offset between fit and detection position for source 11 = 0.709270 pixels
[Tue Feb 21 10:27:43 2012] 1731.337000 total counts/ 138.957000 bgd. counts: snr = 135.084805
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.709270 pixels
  Position = (612.3, 894.7) = 5 34 57.77 -5 23 52.4
  Extent = 0.9 (0.9-0.9)", rotation angle = 0
  Source counts = 1592.4 +/- 41.6
  Background counts = 139.0
  Rate = 0.03 +/- 0.0009
[Tue Feb 21 10:27:43 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:43 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:43 2012] Source does appear to be extended
[Tue Feb 21 10:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:34:34 2012] Writing source region out to fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_src.reg
[Tue Feb 21 12:34:34 2012] Extracting stamp from image fullrun_ccd3_acisf00018_pi14-548_cl_sm2.00.img.gz, (571, 853) - (654, 936)
[Tue Feb 21 12:34:34 2012] Writing fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11.gif
[Tue Feb 21 12:37:39 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_src.evt.gz[events] = 1705 counts
[Tue Feb 21 12:37:39 2012] Mean chipx,y = (458.66, 800.18)
[Tue Feb 21 12:37:39 2012] Mean tdetx,y = (4331.82, 3519.66)
[Tue Feb 21 12:37:39 2012] chipx,y range = (438.00-480.00, 778.00-823.00)
[Tue Feb 21 12:37:39 2012] Size of ../../acisf00018/products/events/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 82 counts
[Tue Feb 21 12:37:40 2012] rmf not found, will run specextract
[Tue Feb 21 12:37:40 2012] arf not found, will run specextract
[Tue Feb 21 12:37:46 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_bkg.pi not found
[Tue Feb 21 12:37:46 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11.warf not found
[Tue Feb 21 12:37:46 2012] ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11.wrmf not found
[Tue Feb 21 12:37:46 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11.soff failed
[Tue Feb 21 12:37:46 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_src.pi
[Tue Feb 21 13:16:39 2012] 182.279
[Tue Feb 21 13:21:34 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:34 2012] Error reading totcts from fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_src.pi
[Tue Feb 21 13:21:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:37 2012] Using photon index=1.80, rate=0.0342, arf fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11.arf
[Tue Feb 21 13:21:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:37 2012] Updating source flux to 3.6e-13
[Tue Feb 21 13:22:00 2012] Source 11 has no response, skipping
[Tue Feb 21 13:22:01 2012] acisf00018/analysis//spectral/fullrun_ccd3_acisf00018_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete