[Mon Feb 20 12:35:00 2012] Detection parameters:
  Position = (293.8, 174.0) = 5 35 13.98 -5 21 23.4
  Extent = 0.5" x 0.5", rotation angle = 126 degrees
  Source counts = 115.4 +/- 11.1
  Background counts = 8.6
  Rate = 0.003 +/- 0.0002

[Mon Feb 20 12:35:10 2012] Off-axis axis estimate = 1.73'
[Mon Feb 20 17:25:05 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:25:05 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Feb 20 17:25:05 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.853
[Mon Feb 20 17:25:05 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 0.41"
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73.csv
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73_1.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73.csv
[Mon Feb 20 19:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:31:38 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src73.ximg exists
[Mon Feb 20 19:31:38 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Feb 20 19:31:38 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Feb 20 23:29:49 2012] Spatial fit model total counts = 133.000000, observed total counts = 133.000000
[Mon Feb 20 23:29:49 2012] Offset between fit and detection position for source 56 = 0.717793 pixels
[Mon Feb 20 23:29:49 2012] 133.981200 total counts/ 22.738200 bgd. counts: snr = 23.328921
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.717793 pixels
  Position = (294.3, 174.5) = 5 35 13.97 -5 21 23.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 111.2 +/- 11.6
  Background counts = 22.7
  Rate = 0.002 +/- 0.0003
[Mon Feb 20 23:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:49 2012] Source does appear to be extended
[Mon Feb 20 23:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:55:39 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Tue Feb 21 03:55:39 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.025
[Tue Feb 21 03:55:39 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 0.48"
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72.csv
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72_1.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72.csv
[Tue Feb 21 06:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src72.ximg exists
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src72_1.ximg exists
[Tue Feb 21 06:03:27 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src72 appears to have run properly
[Tue Feb 21 10:27:29 2012] Spatial fit model total counts = 133.000000, observed total counts = 133.000000
[Tue Feb 21 10:27:29 2012] Offset between fit and detection position for source 56 = 0.000033 pixels
[Tue Feb 21 10:27:29 2012] 133.982000 total counts/ 22.748000 bgd. counts: snr = 23.322008
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.000033 pixels
  Position = (294.3, 174.5) = 5 35 13.97 -5 21 23.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 111.2 +/- 11.6
  Background counts = 22.7
  Rate = 0.002 +/- 0.0003
[Tue Feb 21 10:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:29 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:29 2012] Source does appear to be extended
[Tue Feb 21 10:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:48:31 2012] Writing source region out to fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_src.reg
[Tue Feb 21 11:48:31 2012] Extracting stamp from image fullrun_ccd2_acisf00018_pi14-548_cl_sm2.00.img.gz, (272, 152) - (316, 197)
[Tue Feb 21 11:48:31 2012] Writing fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56.gif
[Tue Feb 21 12:07:59 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_src.evt.gz[events] = 119 counts
[Tue Feb 21 12:07:59 2012] Mean chipx,y = (134.82, 886.69)
[Tue Feb 21 12:07:59 2012] Mean tdetx,y = (3947.69, 3951.18)
[Tue Feb 21 12:07:59 2012] chipx,y range = (117.00-152.00, 866.00-904.00)
[Tue Feb 21 12:07:59 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 26 counts
[Tue Feb 21 12:08:00 2012] rmf not found, will run specextract
[Tue Feb 21 12:08:00 2012] arf not found, will run specextract
[Tue Feb 21 12:08:06 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_bkg.pi not found
[Tue Feb 21 12:08:06 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56.warf not found
[Tue Feb 21 12:08:06 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56.wrmf not found
[Tue Feb 21 12:08:06 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56.soff failed
[Tue Feb 21 12:08:06 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_src.pi
[Tue Feb 21 12:34:32 2012] 194.619
[Tue Feb 21 13:21:29 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:29 2012] Error reading totcts from fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_src.pi
[Tue Feb 21 13:21:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:32 2012] Using photon index=1.80, rate=0.00243, arf fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56.arf
[Tue Feb 21 13:21:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:32 2012] Updating source flux to 2.4e-14
[Tue Feb 21 13:21:59 2012] Source 56 has no response, skipping
[Tue Feb 21 13:22:00 2012] acisf00018/analysis//spectral/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete