[Mon Feb 20 12:34:57 2012] Detection parameters:
  Position = (304.5, 353.8) = 5 35 13.62 -5 19 54.9
  Extent = 0.6" x 0.5", rotation angle = 120 degrees
  Source counts = 978.4 +/- 31.6
  Background counts = 18.6
  Rate = 0.02 +/- 0.0007

[Mon Feb 20 12:35:10 2012] Off-axis axis estimate = 3.19'
[Mon Feb 20 17:25:05 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:25:05 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Feb 20 17:25:05 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.969
[Mon Feb 20 17:25:05 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.62"
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12.csv
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12.csv
[Mon Feb 20 19:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Feb 20 19:31:37 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Feb 20 23:29:48 2012] Spatial fit model total counts = 995.000000, observed total counts = 995.000000
[Mon Feb 20 23:29:48 2012] Offset between fit and detection position for source 23 = 0.720535 pixels
[Mon Feb 20 23:29:48 2012] 997.016700 total counts/ 63.720700 bgd. counts: snr = 116.917396
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.720535 pixels
  Position = (305.0, 354.3) = 5 35 13.62 -5 19 54.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 933.3 +/- 31.6
  Background counts = 63.7
  Rate = 0.02 +/- 0.0007
[Mon Feb 20 23:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:49 2012] Source does appear to be extended
[Mon Feb 20 23:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:55:39 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Feb 21 03:55:39 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.944
[Tue Feb 21 03:55:39 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.63"
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12.csv
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12.csv
[Tue Feb 21 06:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Feb 21 06:03:27 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Feb 21 10:27:28 2012] Spatial fit model total counts = 994.000000, observed total counts = 994.000000
[Tue Feb 21 10:27:28 2012] Offset between fit and detection position for source 23 = 0.001443 pixels
[Tue Feb 21 10:27:28 2012] 995.727300 total counts/ 59.314300 bgd. counts: snr = 121.587164
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.001443 pixels
  Position = (305.0, 354.3) = 5 35 13.62 -5 19 54.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 936.4 +/- 31.6
  Background counts = 59.3
  Rate = 0.02 +/- 0.0007
[Tue Feb 21 10:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:29 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:29 2012] Source does appear to be extended
[Tue Feb 21 10:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:48:27 2012] Writing source region out to fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_src.reg
[Tue Feb 21 11:48:27 2012] Extracting stamp from image fullrun_ccd2_acisf00018_pi14-548_cl_sm2.00.img.gz, (276, 325) - (334, 383)
[Tue Feb 21 11:48:27 2012] Writing fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23.gif
[Tue Feb 21 11:51:46 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_src.evt.gz[events] = 965 counts
[Tue Feb 21 11:51:46 2012] Mean chipx,y = (176.60, 710.02)
[Tue Feb 21 11:51:46 2012] Mean tdetx,y = (3771.02, 3909.40)
[Tue Feb 21 11:51:46 2012] chipx,y range = (156.00-196.00, 690.00-731.00)
[Tue Feb 21 11:51:46 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 61 counts
[Tue Feb 21 11:51:47 2012] rmf not found, will run specextract
[Tue Feb 21 11:51:47 2012] arf not found, will run specextract
[Tue Feb 21 11:51:53 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_bkg.pi not found
[Tue Feb 21 11:51:53 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23.warf not found
[Tue Feb 21 11:51:53 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23.wrmf not found
[Tue Feb 21 11:51:53 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23.soff failed
[Tue Feb 21 11:51:53 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_src.pi
[Tue Feb 21 12:34:31 2012] 191.188
[Tue Feb 21 13:21:28 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:28 2012] Error reading totcts from fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_src.pi
[Tue Feb 21 13:21:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:31 2012] Using photon index=1.80, rate=0.0205, arf fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23.arf
[Tue Feb 21 13:21:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:31 2012] Updating source flux to 2.1e-13
[Tue Feb 21 13:21:59 2012] Source 23 has no response, skipping
[Tue Feb 21 13:22:00 2012] acisf00018/analysis//spectral/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete