[Mon Feb 20 12:34:57 2012] Detection parameters:
  Position = (195.5, 156.9) = 5 35 17.21 -5 21 31.8
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 720.0 +/- 27.1
  Background counts = 16.0
  Rate = 0.02 +/- 0.0006

[Mon Feb 20 12:35:10 2012] Off-axis axis estimate = 1.58'
[Mon Feb 20 17:25:05 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:25:05 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Feb 20 17:25:05 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.879
[Mon Feb 20 17:25:05 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 0.40"
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17.csv
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17.csv
[Mon Feb 20 19:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 20 19:31:38 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 20 19:31:38 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Feb 20 23:29:48 2012] Spatial fit model total counts = 740.773000, observed total counts = 741.000000
[Mon Feb 20 23:29:48 2012] Offset between fit and detection position for source 16 = 0.696515 pixels
[Mon Feb 20 23:29:48 2012] 745.675200 total counts/ 71.614200 bgd. counts: snr = 79.652540
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.696515 pixels
  Position = (196.0, 157.4) = 5 35 17.21 -5 21 31.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 674.1 +/- 27.3
  Background counts = 71.6
  Rate = 0.01 +/- 0.0006
[Mon Feb 20 23:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:49 2012] Source does appear to be extended
[Mon Feb 20 23:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:55:39 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Tue Feb 21 03:55:39 2012] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.720
[Tue Feb 21 03:55:39 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.46"
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17.csv
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17.csv
[Tue Feb 21 06:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Feb 21 06:03:27 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Feb 21 10:27:28 2012] Spatial fit model total counts = 740.002000, observed total counts = 740.000000
[Tue Feb 21 10:27:28 2012] Offset between fit and detection position for source 16 = 0.001457 pixels
[Tue Feb 21 10:27:28 2012] 743.683800 total counts/ 67.211800 bgd. counts: snr = 82.513890
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.001457 pixels
  Position = (196.0, 157.4) = 5 35 17.21 -5 21 31.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 676.5 +/- 27.3
  Background counts = 67.2
  Rate = 0.01 +/- 0.0006
[Tue Feb 21 10:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:29 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:29 2012] Source does appear to be extended
[Tue Feb 21 10:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:48:27 2012] Writing source region out to fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_src.reg
[Tue Feb 21 11:48:27 2012] Extracting stamp from image fullrun_ccd2_acisf00018_pi14-548_cl_sm2.00.img.gz, (175, 136) - (217, 179)
[Tue Feb 21 11:48:27 2012] Writing fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16.gif
[Tue Feb 21 11:53:04 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_src.evt.gz[events] = 696 counts
[Tue Feb 21 11:53:04 2012] Mean chipx,y = (33.31, 886.38)
[Tue Feb 21 11:53:04 2012] Mean tdetx,y = (3947.38, 4052.69)
[Tue Feb 21 11:53:04 2012] chipx,y range = (15.00-53.00, 867.00-905.00)
[Tue Feb 21 11:53:04 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 39 counts
[Tue Feb 21 11:53:05 2012] rmf not found, will run specextract
[Tue Feb 21 11:53:05 2012] arf not found, will run specextract
[Tue Feb 21 11:53:11 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_bkg.pi not found
[Tue Feb 21 11:53:11 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16.warf not found
[Tue Feb 21 11:53:11 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16.wrmf not found
[Tue Feb 21 11:53:11 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16.soff failed
[Tue Feb 21 11:53:11 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_src.pi
[Tue Feb 21 12:34:31 2012] 195.615
[Tue Feb 21 13:21:28 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:28 2012] Error reading totcts from fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_src.pi
[Tue Feb 21 13:21:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:31 2012] Using photon index=1.80, rate=0.0148, arf fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16.arf
[Tue Feb 21 13:21:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:31 2012] Updating source flux to 1.5e-13
[Tue Feb 21 13:21:59 2012] Source 16 has no response, skipping
[Tue Feb 21 13:22:00 2012] acisf00018/analysis//spectral/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete