[Mon Feb 20 12:34:57 2012] Detection parameters:
  Position = (299.3, 85.2) = 5 35 13.80 -5 22 7.1
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 416.6 +/- 20.9
  Background counts = 20.4
  Rate = 0.009 +/- 0.0005

[Mon Feb 20 12:35:10 2012] Off-axis axis estimate = 1.05'
[Mon Feb 20 17:25:05 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:25:05 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 20 17:25:05 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Mon Feb 20 17:25:05 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 0.38"
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33.csv
[Mon Feb 20 19:31:37 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33_1.ximg exists
[Mon Feb 20 19:31:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33.csv
[Mon Feb 20 19:31:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 19:31:38 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Mon Feb 20 19:31:38 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Feb 20 19:31:38 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Feb 20 23:29:48 2012] Spatial fit model total counts = 450.555000, observed total counts = 451.000000
[Mon Feb 20 23:29:48 2012] Offset between fit and detection position for source 10 = 0.685425 pixels
[Mon Feb 20 23:29:48 2012] 449.295500 total counts/ 93.943500 bgd. counts: snr = 36.662780
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.685425 pixels
  Position = (299.7, 85.7) = 5 35 13.80 -5 22 7.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 355.4 +/- 21.2
  Background counts = 93.9
  Rate = 0.008 +/- 0.0005
[Mon Feb 20 23:29:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:49 2012] Source does appear to be extended
[Mon Feb 20 23:29:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 03:55:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 03:55:39 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 21 03:55:39 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.370
[Tue Feb 21 03:55:39 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 0.38"
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33.csv
[Tue Feb 21 06:03:26 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33_1.ximg exists
[Tue Feb 21 06:03:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33.csv
[Tue Feb 21 06:03:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00018_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Tue Feb 21 06:03:27 2012] fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Feb 21 06:03:27 2012] Fit fullrun_ccd2_acisf00018_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Feb 21 10:27:29 2012] Spatial fit model total counts = 449.545000, observed total counts = 450.000000
[Tue Feb 21 10:27:29 2012] Offset between fit and detection position for source 10 = 0.005818 pixels
[Tue Feb 21 10:27:29 2012] 443.315400 total counts/ 88.656400 bgd. counts: snr = 37.666558
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005818 pixels
  Position = (299.7, 85.7) = 5 35 13.80 -5 22 7.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 354.7 +/- 21.1
  Background counts = 88.7
  Rate = 0.008 +/- 0.0005
[Tue Feb 21 10:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:29 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:29 2012] Source does appear to be extended
[Tue Feb 21 10:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:48:28 2012] Writing source region out to fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_src.reg
[Tue Feb 21 11:48:28 2012] Extracting stamp from image fullrun_ccd2_acisf00018_pi14-548_cl_sm2.00.img.gz, (282, 68) - (317, 103)
[Tue Feb 21 11:48:28 2012] Writing fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10.gif
[Tue Feb 21 11:57:25 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_src.evt.gz[events] = 372 counts
[Tue Feb 21 11:57:25 2012] Mean chipx,y = (122.36, 974.55)
[Tue Feb 21 11:57:25 2012] Mean tdetx,y = (4035.55, 3963.64)
[Tue Feb 21 11:57:25 2012] chipx,y range = (106.00-142.00, 957.00-993.00)
[Tue Feb 21 11:57:25 2012] Size of ../../acisf00018/products/events/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 54 counts
[Tue Feb 21 11:57:26 2012] rmf not found, will run specextract
[Tue Feb 21 11:57:26 2012] arf not found, will run specextract
[Tue Feb 21 11:57:32 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_bkg.pi not found
[Tue Feb 21 11:57:32 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10.warf not found
[Tue Feb 21 11:57:32 2012] ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10.wrmf not found
[Tue Feb 21 11:57:32 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10.soff failed
[Tue Feb 21 11:57:32 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_src.pi
[Tue Feb 21 12:34:31 2012] 195.176
[Tue Feb 21 13:21:28 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:28 2012] Error reading totcts from fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_src.pi
[Tue Feb 21 13:21:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:31 2012] Using photon index=1.80, rate=0.00775, arf fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10.arf
[Tue Feb 21 13:21:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:31 2012] Updating source flux to 7.7e-14
[Tue Feb 21 13:21:59 2012] Source 10 has no response, skipping
[Tue Feb 21 13:22:00 2012] acisf00018/analysis//spectral/fullrun_ccd2_acisf00018_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete