[Mon Feb 20 12:34:45 2012] Detection parameters:
  Position = (995.0, 759.1) = 5 35 18.58 -5 26 24.9
  Extent = 0.6" x 0.5", rotation angle = 37 degrees
  Source counts = 133.3 +/- 11.8
  Background counts = 5.7
  Rate = 0.003 +/- 0.0003

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 3.43'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Feb 20 15:01:47 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.141
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 0.68"
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82.csv
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82_1.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82.csv
[Mon Feb 20 17:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src82.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src82_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src82 appears to have run properly
[Mon Feb 20 23:29:36 2012] Spatial fit model total counts = 142.704000, observed total counts = 143.000000
[Mon Feb 20 23:29:36 2012] Offset between fit and detection position for source 83 = 0.745899 pixels
[Mon Feb 20 23:29:36 2012] 141.537100 total counts/ 10.684100 bgd. counts: snr = 40.032684
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.745899 pixels
  Position = (995.5, 759.6) = 5 35 18.58 -5 26 24.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 130.9 +/- 11.9
  Background counts = 10.7
  Rate = 0.003 +/- 0.0003
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:40:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Feb 21 01:40:12 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.695
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 0.64"
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82.csv
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82_1.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82.csv
[Tue Feb 21 03:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src82.ximg exists
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src82_1.ximg exists
[Tue Feb 21 03:55:39 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src82 appears to have run properly
[Tue Feb 21 10:27:16 2012] Spatial fit model total counts = 142.818000, observed total counts = 143.000000
[Tue Feb 21 10:27:16 2012] Offset between fit and detection position for source 83 = 0.000568 pixels
[Tue Feb 21 10:27:16 2012] 141.763100 total counts/ 11.059100 bgd. counts: snr = 39.303297
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.000568 pixels
  Position = (995.5, 759.6) = 5 35 18.58 -5 26 24.9
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 130.7 +/- 11.9
  Background counts = 11.1
  Rate = 0.003 +/- 0.0003
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:02 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_src.reg
[Tue Feb 21 11:04:02 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (966, 730) - (1025, 789)
[Tue Feb 21 11:04:02 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83.gif
[Tue Feb 21 11:25:34 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_src.evt.gz[events] = 135 counts
[Tue Feb 21 11:25:34 2012] Mean chipx,y = (87.20, 604.41)
[Tue Feb 21 11:25:34 2012] Mean tdetx,y = (4527.59, 4194.20)
[Tue Feb 21 11:25:34 2012] chipx,y range = (70.00-108.00, 588.00-623.00)
[Tue Feb 21 11:25:34 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_bgd.evt.gz[events] = 25 counts
[Tue Feb 21 11:25:35 2012] rmf not found, will run specextract
[Tue Feb 21 11:25:35 2012] arf not found, will run specextract
[Tue Feb 21 11:25:41 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_bkg.pi not found
[Tue Feb 21 11:25:41 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83.warf not found
[Tue Feb 21 11:25:41 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83.wrmf not found
[Tue Feb 21 11:25:41 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83.soff failed
[Tue Feb 21 11:25:41 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_src.pi
[Tue Feb 21 11:48:25 2012] 194.527
[Tue Feb 21 13:21:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:23 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_src.pi
[Tue Feb 21 13:21:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:26 2012] Using photon index=1.80, rate=0.0028, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83.arf
[Tue Feb 21 13:21:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:26 2012] Updating source flux to 2.8e-14
[Tue Feb 21 13:21:58 2012] Source 83 has no response, skipping
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete