[Mon Feb 20 12:34:44 2012] Detection parameters:
  Position = (920.9, 547.3) = 5 35 21.02 -5 28 9.1
  Extent = 1.1" x 0.7", rotation angle = 34 degrees
  Source counts = 119.3 +/- 11.3
  Background counts = 8.7
  Rate = 0.003 +/- 0.0002

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 5.26'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 1.29"
[Mon Feb 20 15:01:47 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 1.29"
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86.csv
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86_1.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86.csv
[Mon Feb 20 17:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src86.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src86_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src86 appears to have run properly
[Mon Feb 20 23:29:36 2012] Spatial fit model total counts = 126.850000, observed total counts = 127.000000
[Mon Feb 20 23:29:36 2012] Offset between fit and detection position for source 63 = 1.027721 pixels
[Mon Feb 20 23:29:36 2012] 126.780900 total counts/ 39.326800 bgd. counts: snr = 13.945557
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.027721 pixels
  Position = (921.6, 548.1) = 5 35 21.02 -5 28 9.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 87.5 +/- 11.3
  Background counts = 39.3
  Rate = 0.002 +/- 0.0002
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:40:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Feb 21 01:40:12 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.831
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 86 for pass 1, mean size = 0.69"
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86.csv
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86_1.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86.csv
[Tue Feb 21 03:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src86.ximg exists
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src86_1.ximg exists
[Tue Feb 21 03:55:39 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src86 appears to have run properly
[Tue Feb 21 10:27:16 2012] Spatial fit model total counts = 126.378000, observed total counts = 127.000000
[Tue Feb 21 10:27:16 2012] Offset between fit and detection position for source 63 = 0.031192 pixels
[Tue Feb 21 10:27:16 2012] 125.402200 total counts/ 40.013600 bgd. counts: snr = 13.498829
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.031192 pixels
  Position = (921.6, 548.1) = 5 35 21.02 -5 28 9.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 85.4 +/- 11.2
  Background counts = 40.0
  Rate = 0.002 +/- 0.0002
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:02 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_src.reg
[Tue Feb 21 11:04:02 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (891, 518) - (952, 578)
[Tue Feb 21 11:04:02 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63.gif
[Tue Feb 21 11:26:36 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_src.evt.gz[events] = 104 counts
[Tue Feb 21 11:26:36 2012] Mean chipx,y = (199.79, 409.77)
[Tue Feb 21 11:26:36 2012] Mean tdetx,y = (4722.23, 4306.79)
[Tue Feb 21 11:26:36 2012] chipx,y range = (180.00-220.00, 391.00-427.00)
[Tue Feb 21 11:26:36 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 43 counts
[Tue Feb 21 11:26:37 2012] Not generating rmf since there are only 85 counts
[Tue Feb 21 11:26:37 2012] arf not found, will run specextract
[Tue Feb 21 11:26:43 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_bkg.pi not found
[Tue Feb 21 11:26:43 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63.warf not found
[Tue Feb 21 11:26:43 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63.wrmf not found
[Tue Feb 21 11:26:43 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63.soff failed
[Tue Feb 21 11:26:43 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_src.pi
[Tue Feb 21 11:48:25 2012] 194.86
[Tue Feb 21 13:21:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:23 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_src.pi
[Tue Feb 21 13:21:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:26 2012] Using photon index=1.80, rate=0.00183, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63.arf
[Tue Feb 21 13:21:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:26 2012] Updating source flux to 1.9e-14
[Tue Feb 21 13:21:58 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete