[Mon Feb 20 12:34:42 2012] Detection parameters:
  Position = (702.9, 935.5) = 5 35 28.20 -5 24 58.1
  Extent = 0.5" x 0.5", rotation angle = 22 degrees
  Source counts = 384.5 +/- 19.9
  Background counts = 11.5
  Rate = 0.008 +/- 0.0004

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 3.65'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Mon Feb 20 15:01:47 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.759
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 0.73"
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38.csv
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38_1.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38.csv
[Mon Feb 20 17:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Mon Feb 20 23:29:35 2012] Spatial fit model total counts = 405.216000, observed total counts = 408.000000
[Mon Feb 20 23:29:35 2012] Offset between fit and detection position for source 35 = 0.755019 pixels
[Mon Feb 20 23:29:35 2012] 401.825100 total counts/ 49.824100 bgd. counts: snr = 49.868254
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.755019 pixels
  Position = (703.5, 936.0) = 5 35 28.20 -5 24 58.1
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 352.0 +/- 20.0
  Background counts = 49.8
  Rate = 0.008 +/- 0.0004
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:40:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Feb 21 01:40:12 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.929
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 0.64"
[Tue Feb 21 03:55:37 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38.ximg exists
[Tue Feb 21 03:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38.csv
[Tue Feb 21 03:55:37 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38_1.ximg exists
[Tue Feb 21 03:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38.csv
[Tue Feb 21 03:55:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Tue Feb 21 03:55:38 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Tue Feb 21 10:27:15 2012] Spatial fit model total counts = 396.754000, observed total counts = 397.000000
[Tue Feb 21 10:27:15 2012] Offset between fit and detection position for source 35 = 0.012521 pixels
[Tue Feb 21 10:27:15 2012] 394.597000 total counts/ 39.085000 bgd. counts: snr = 56.865545
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.012521 pixels
  Position = (703.5, 936.0) = 5 35 28.20 -5 24 58.1
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 355.5 +/- 19.9
  Background counts = 39.1
  Rate = 0.008 +/- 0.0004
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:00 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_src.reg
[Tue Feb 21 11:04:00 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (674, 907) - (733, 966)
[Tue Feb 21 11:04:00 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35.gif
[Tue Feb 21 11:14:08 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_src.evt.gz[events] = 377 counts
[Tue Feb 21 11:14:08 2012] Mean chipx,y = (345.12, 828.90)
[Tue Feb 21 11:14:08 2012] Mean tdetx,y = (4303.10, 4452.12)
[Tue Feb 21 11:14:08 2012] chipx,y range = (327.00-367.00, 811.00-850.00)
[Tue Feb 21 11:14:08 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 38 counts
[Tue Feb 21 11:14:09 2012] rmf not found, will run specextract
[Tue Feb 21 11:14:09 2012] arf not found, will run specextract
[Tue Feb 21 11:14:15 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_bkg.pi not found
[Tue Feb 21 11:14:15 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35.warf not found
[Tue Feb 21 11:14:15 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35.wrmf not found
[Tue Feb 21 11:14:15 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35.soff failed
[Tue Feb 21 11:14:15 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_src.pi
[Tue Feb 21 11:48:24 2012] 191.674
[Tue Feb 21 13:21:22 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:22 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_src.pi
[Tue Feb 21 13:21:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:25 2012] Using photon index=1.80, rate=0.0076, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35.arf
[Tue Feb 21 13:21:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:25 2012] Updating source flux to 7.7e-14
[Tue Feb 21 13:21:58 2012] Source 35 has no response, skipping
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete