[Mon Feb 20 12:34:52 2012] Detection parameters:
  Position = (176.6, 519.5) = 5 35 45.55 -5 28 22.8
  Extent = 1.5" x 1.3", rotation angle = 9 degrees
  Source counts = 120.1 +/- 12.5
  Background counts = 35.9
  Rate = 0.003 +/- 0.0003

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 9.14'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 3.69"
[Mon Feb 20 15:01:47 2012] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.999
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 3.69"
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85.csv
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85_1.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85.csv
[Mon Feb 20 17:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Mon Feb 20 23:29:36 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 188 at 10.610229 pixels away
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.18
[Tue Feb 21 01:40:12 2012] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 3.69"
[Tue Feb 21 01:40:12 2012] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.999
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 3.69"
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85.csv
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85_1.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85.csv
[Tue Feb 21 03:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src85.ximg exists
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src85_1.ximg exists
[Tue Feb 21 03:55:39 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src85 appears to have run properly
[Tue Feb 21 10:27:16 2012] Spatial fit model total counts = 315.338000, observed total counts = 312.000000
[Tue Feb 21 10:27:16 2012] Offset between fit and detection position for source 188 = 0.490650 pixels
[Tue Feb 21 10:27:16 2012] 320.340600 total counts/ 252.513000 bgd. counts: snr = 4.268395
Spatial fit parameters:
  Offset between fit and detection position for source 188 = 0.490650 pixels
  Position = (177.0, 519.8) = 5 35 45.55 -5 28 22.9
  Extent = 1.6 (1.0-2.1)", rotation angle = 0
  Source counts = 67.8 +/- 17.9
  Background counts = 252.5
  Rate = 0.001 +/- 0.0004
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:02 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_src.reg
[Tue Feb 21 11:04:02 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (105, 448) - (249, 592)
[Tue Feb 21 11:04:02 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188.gif
[Tue Feb 21 11:26:20 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_src.evt.gz[events] = 135 counts
[Tue Feb 21 11:26:20 2012] Mean chipx,y = (939.22, 510.99)
[Tue Feb 21 11:26:20 2012] Mean tdetx,y = (4621.01, 5046.22)
[Tue Feb 21 11:26:20 2012] chipx,y range = (916.00-967.00, 483.00-538.00)
[Tue Feb 21 11:26:20 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_bgd.evt.gz[events] = 75 counts
[Tue Feb 21 11:26:21 2012] Not generating rmf since there are only 67 counts
[Tue Feb 21 11:26:21 2012] arf not found, will run specextract
[Tue Feb 21 11:26:27 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_bkg.pi not found
[Tue Feb 21 11:26:27 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188.warf not found
[Tue Feb 21 11:26:27 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188.wrmf not found
[Tue Feb 21 11:26:27 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188.soff failed
[Tue Feb 21 11:26:27 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_src.pi
[Tue Feb 21 11:48:25 2012] 175.74
[Tue Feb 21 13:21:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:23 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_src.pi
[Tue Feb 21 13:21:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:26 2012] Using photon index=1.80, rate=0.00145, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188.arf
[Tue Feb 21 13:21:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:26 2012] Updating source flux to 1.6e-14
[Tue Feb 21 13:21:58 2012] Source 188 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src188_pl.csv not found, spectral fit skipped or did not complete