[Mon Feb 20 12:34:50 2012] Detection parameters:
  Position = (978.7, 1120.5) = 5 35 19.12 -5 23 27.1
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 184.2 +/- 14.3
  Background counts = 19.8
  Rate = 0.004 +/- 0.0003

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 0.94'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 20 15:01:47 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.389
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 0.38"
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67.csv
[Mon Feb 20 17:25:04 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67_1.ximg exists
[Mon Feb 20 17:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67.csv
[Mon Feb 20 17:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src67.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Feb 20 23:29:36 2012] Spatial fit model total counts = 231.000000, observed total counts = 231.000000
[Mon Feb 20 23:29:36 2012] Offset between fit and detection position for source 158 = 0.729934 pixels
[Mon Feb 20 23:29:36 2012] 231.690100 total counts/ 56.538100 bgd. counts: snr = 23.294023
Spatial fit parameters:
  Offset between fit and detection position for source 158 = 0.729934 pixels
  Position = (979.2, 1121.0) = 5 35 19.12 -5 23 27.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 175.2 +/- 15.2
  Background counts = 56.5
  Rate = 0.004 +/- 0.0003
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:40:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 0.37"
[Tue Feb 21 01:40:12 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.631
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 0.37"
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67.csv
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67_1.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67.csv
[Tue Feb 21 03:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src67.ximg exists
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Feb 21 03:55:38 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src67 appears to have run properly
[Tue Feb 21 10:27:15 2012] Spatial fit model total counts = 227.000000, observed total counts = 227.000000
[Tue Feb 21 10:27:15 2012] Offset between fit and detection position for source 158 = 0.001131 pixels
[Tue Feb 21 10:27:15 2012] 226.981400 total counts/ 51.596400 bgd. counts: snr = 24.416463
Spatial fit parameters:
  Offset between fit and detection position for source 158 = 0.001131 pixels
  Position = (979.2, 1121.0) = 5 35 19.12 -5 23 27.1
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 175.4 +/- 15.1
  Background counts = 51.6
  Rate = 0.004 +/- 0.0003
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:01 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_src.reg
[Tue Feb 21 11:04:01 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (962, 1104) - (996, 1138)
[Tue Feb 21 11:04:01 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158.gif
[Tue Feb 21 11:21:39 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_src.evt.gz[events] = 183 counts
[Tue Feb 21 11:21:39 2012] Mean chipx,y = (42.68, 965.99)
[Tue Feb 21 11:21:39 2012] Mean tdetx,y = (4166.01, 4149.68)
[Tue Feb 21 11:21:39 2012] chipx,y range = (24.00-61.00, 948.00-983.00)
[Tue Feb 21 11:21:39 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_bgd.evt.gz[events] = 59 counts
[Tue Feb 21 11:21:40 2012] rmf not found, will run specextract
[Tue Feb 21 11:21:40 2012] arf not found, will run specextract
[Tue Feb 21 11:21:46 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_bkg.pi not found
[Tue Feb 21 11:21:46 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158.warf not found
[Tue Feb 21 11:21:46 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158.wrmf not found
[Tue Feb 21 11:21:46 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158.soff failed
[Tue Feb 21 11:21:46 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_src.pi
[Tue Feb 21 11:48:24 2012] 192.462
[Tue Feb 21 13:21:22 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:22 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_src.pi
[Tue Feb 21 13:21:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:25 2012] Using photon index=1.80, rate=0.00375, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158.arf
[Tue Feb 21 13:21:25 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:25 2012] Updating source flux to 3.8e-14
[Tue Feb 21 13:21:58 2012] Source 158 has no response, skipping
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src158_pl.csv not found, spectral fit skipped or did not complete