[Mon Feb 20 12:34:46 2012] Detection parameters:
  Position = (764.2, 890.2) = 5 35 26.19 -5 25 20.4
  Extent = 0.6" x 0.5", rotation angle = 180 degrees
  Source counts = 114.2 +/- 11.2
  Background counts = 10.8
  Rate = 0.002 +/- 0.0002

[Mon Feb 20 12:34:54 2012] Off-axis axis estimate = 3.47'
[Mon Feb 20 15:01:47 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 15:01:47 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Feb 20 15:01:47 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.119
[Mon Feb 20 15:01:47 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 0.68"
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90.csv
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90_1.ximg exists
[Mon Feb 20 17:25:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90.csv
[Mon Feb 20 17:25:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src90.ximg exists
[Mon Feb 20 17:25:05 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src90_1.ximg exists
[Mon Feb 20 17:25:05 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass0_tfrozen_src90 appears to have run properly
[Mon Feb 20 23:29:36 2012] Spatial fit model total counts = 125.039000, observed total counts = 126.000000
[Mon Feb 20 23:29:36 2012] Offset between fit and detection position for source 104 = 0.835182 pixels
[Mon Feb 20 23:29:36 2012] 123.902680 total counts/ 6.152680 bgd. counts: snr = 47.471041
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 0.835182 pixels
  Position = (764.9, 890.7) = 5 35 26.18 -5 25 20.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 117.8 +/- 11.1
  Background counts = 6.2
  Rate = 0.003 +/- 0.0002
[Mon Feb 20 23:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:36 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:36 2012] Source does appear to be extended
[Mon Feb 20 23:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:40:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 01:40:12 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Tue Feb 21 01:40:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.034
[Tue Feb 21 01:40:12 2012] Giving source the simple spatial ID 90 for pass 1, mean size = 0.59"
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90.csv
[Tue Feb 21 03:55:38 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90_1.ximg exists
[Tue Feb 21 03:55:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90.csv
[Tue Feb 21 03:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00018_pi14-548_cl_pass1_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src90.ximg exists
[Tue Feb 21 03:55:39 2012] fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src90_1.ximg exists
[Tue Feb 21 03:55:39 2012] Fit fullrun_ccd1_acisf00018_pi14-548_cl_pass1_tfrozen_src90 appears to have run properly
[Tue Feb 21 10:27:16 2012] Spatial fit model total counts = 124.806000, observed total counts = 127.000000
[Tue Feb 21 10:27:16 2012] Offset between fit and detection position for source 104 = 0.009696 pixels
[Tue Feb 21 10:27:16 2012] 123.592830 total counts/ 8.583830 bgd. counts: snr = 39.254665
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 0.009696 pixels
  Position = (764.9, 890.7) = 5 35 26.18 -5 25 20.4
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 115.0 +/- 11.1
  Background counts = 8.6
  Rate = 0.002 +/- 0.0002
[Tue Feb 21 10:27:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:16 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:16 2012] Source does appear to be extended
[Tue Feb 21 10:27:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:04:02 2012] Writing source region out to fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_src.reg
[Tue Feb 21 11:04:02 2012] Extracting stamp from image fullrun_ccd1_acisf00018_pi14-548_cl_sm2.00.img.gz, (738, 864) - (792, 918)
[Tue Feb 21 11:04:02 2012] Writing fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104.gif
[Tue Feb 21 11:27:37 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_src.evt.gz[events] = 121 counts
[Tue Feb 21 11:27:37 2012] Mean chipx,y = (291.78, 776.93)
[Tue Feb 21 11:27:37 2012] Mean tdetx,y = (4355.07, 4398.78)
[Tue Feb 21 11:27:37 2012] chipx,y range = (275.00-312.00, 757.00-793.00)
[Tue Feb 21 11:27:37 2012] Size of ../../acisf00018/products/events/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_bgd.evt.gz[events] = 23 counts
[Tue Feb 21 11:27:38 2012] rmf not found, will run specextract
[Tue Feb 21 11:27:38 2012] arf not found, will run specextract
[Tue Feb 21 11:27:44 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_bkg.pi not found
[Tue Feb 21 11:27:44 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104.warf not found
[Tue Feb 21 11:27:44 2012] ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104.wrmf not found
[Tue Feb 21 11:27:44 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104.soff failed
[Tue Feb 21 11:27:44 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_src.pi
[Tue Feb 21 11:48:25 2012] 184.235
[Tue Feb 21 13:21:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:23 2012] Error reading totcts from fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_src.pi
[Tue Feb 21 13:21:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:26 2012] Using photon index=1.80, rate=0.00246, arf fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104.arf
[Tue Feb 21 13:21:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:26 2012] Updating source flux to 2.6e-14
[Tue Feb 21 13:21:58 2012] Source 104 has no response, skipping
[Tue Feb 21 13:21:59 2012] acisf00018/analysis//spectral/fullrun_ccd1_acisf00018_pi14-548_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete