[Mon Feb 20 12:34:35 2012] Detection parameters:
  Position = (1005.3, 212.8) = 5 35 24.34 -5 22 32.3
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 39.0 +/- 6.6
  Background counts = 4.0
  Rate = 0.0008 +/- 0.0001

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 2.22'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Feb 20 12:42:49 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.112
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 0.45"
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91.ximg exists
[Mon Feb 20 15:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91.csv
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91_1.ximg exists
[Mon Feb 20 15:01:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91.csv
[Mon Feb 20 15:01:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src91.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src91_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src91 appears to have run properly
[Mon Feb 20 23:29:23 2012] Spatial fit model total counts = 51.899700, observed total counts = 51.000000
[Mon Feb 20 23:29:23 2012] Offset between fit and detection position for source 91 = 0.703680 pixels
[Mon Feb 20 23:29:23 2012] 52.482000 total counts/ 11.905300 bgd. counts: snr = 11.759979
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.703680 pixels
  Position = (1005.8, 213.4) = 5 35 24.34 -5 22 32.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 40.6 +/- 7.2
  Background counts = 11.9
  Rate = 0.0009 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.965
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 0.51"
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91.ximg exists
[Tue Feb 21 01:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91.csv
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91_1.ximg exists
[Tue Feb 21 01:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91.csv
[Tue Feb 21 01:40:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src91.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src91_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src91 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 45.658000, observed total counts = 51.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 91 = 0.132117 pixels
[Tue Feb 21 10:27:02 2012] 45.803220 total counts/ 7.140020 bgd. counts: snr = 14.469319
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.132117 pixels
  Position = (1005.9, 213.3) = 5 35 24.33 -5 22 32.4
  Extent = 0.6" x 0.3", rotation angle = 0
  Source counts = 38.7 +/- 6.8
  Background counts = 7.1
  Rate = 0.0008 +/- 0.0001
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.96
[Tue Feb 21 10:27:03 2012] Source is asymmetric
[Tue Feb 21 10:28:53 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_src.reg
[Tue Feb 21 10:28:53 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (978, 185) - (1034, 241)
[Tue Feb 21 10:28:53 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91.gif
[Tue Feb 21 10:51:49 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_src.evt.gz[events] = 41 counts
[Tue Feb 21 10:51:49 2012] Mean chipx,y = (844.95, 966.95)
[Tue Feb 21 10:51:49 2012] Mean tdetx,y = (4027.95, 4287.05)
[Tue Feb 21 10:51:49 2012] chipx,y range = (826.00-863.00, 951.00-986.00)
[Tue Feb 21 10:51:49 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_bgd.evt.gz[events] = 43 counts
[Tue Feb 21 10:51:50 2012] Not generating rmf since there are only 38 counts
[Tue Feb 21 10:51:50 2012] arf not found, will run specextract
[Tue Feb 21 10:51:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_bkg.pi not found
[Tue Feb 21 10:51:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91.warf not found
[Tue Feb 21 10:51:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91.wrmf not found
[Tue Feb 21 10:51:56 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91.soff failed
[Tue Feb 21 10:51:56 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_src.pi
[Tue Feb 21 11:03:57 2012] 191.9
[Tue Feb 21 13:21:18 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:18 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.000829, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 8.4e-15
[Tue Feb 21 13:21:57 2012] Source 91 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete