[Mon Feb 20 12:34:34 2012] Detection parameters:
  Position = (504.9, 315.5) = 5 35 40.82 -5 21 41.8
  Extent = 1.8" x 1.8", rotation angle = 163 degrees
  Source counts = 75.4 +/- 9.4
  Background counts = 12.6
  Rate = 0.002 +/- 0.0002

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 6.40'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 1.84"
[Mon Feb 20 12:42:49 2012] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.001
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 1.84"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src68.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src68_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src68 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 83.689800, observed total counts = 84.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 68 = 1.060048 pixels
[Mon Feb 20 23:29:22 2012] 83.769700 total counts/ 17.425600 bgd. counts: snr = 15.893093
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 1.060048 pixels
  Position = (504.8, 316.5) = 5 35 40.84 -5 21 41.5
  Extent = 1.8 (1.4-2.5)", rotation angle = 0
  Source counts = 66.3 +/- 9.2
  Background counts = 17.4
  Rate = 0.001 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 1.82"
[Mon Feb 20 23:31:09 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.016
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 1.82"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src68.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src68_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src68 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 81.893900, observed total counts = 82.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 68 = 0.077807 pixels
[Tue Feb 21 10:27:02 2012] 82.113200 total counts/ 18.568800 bgd. counts: snr = 14.746378
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.077807 pixels
  Position = (504.7, 316.5) = 5 35 40.84 -5 21 41.6
  Extent = 1.8 (1.4-2.2)", rotation angle = 0
  Source counts = 63.5 +/- 9.1
  Background counts = 18.6
  Rate = 0.001 +/- 0.0002
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:52 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_src.reg
[Tue Feb 21 10:28:52 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (424, 235) - (586, 398)
[Tue Feb 21 10:28:52 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68.gif
[Tue Feb 21 10:45:49 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_src.evt.gz[events] = 84 counts
[Tue Feb 21 10:45:49 2012] Mean chipx,y = (370.19, 780.24)
[Tue Feb 21 10:45:49 2012] Mean tdetx,y = (3841.24, 4761.81)
[Tue Feb 21 10:45:49 2012] chipx,y range = (343.00-394.00, 757.00-801.00)
[Tue Feb 21 10:45:49 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_bgd.evt.gz[events] = 139 counts
[Tue Feb 21 10:45:50 2012] Not generating rmf since there are only 63 counts
[Tue Feb 21 10:45:50 2012] arf not found, will run specextract
[Tue Feb 21 10:45:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_bkg.pi not found
[Tue Feb 21 10:45:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68.warf not found
[Tue Feb 21 10:45:56 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68.wrmf not found
[Tue Feb 21 10:45:56 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68.soff failed
[Tue Feb 21 10:45:56 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_src.pi
[Tue Feb 21 11:03:57 2012] 178.839
[Tue Feb 21 13:21:18 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:18 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.00136, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 1.5e-14
[Tue Feb 21 13:21:57 2012] Source 68 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete