[Mon Feb 20 12:34:34 2012] Detection parameters:
  Position = (894.5, 847.4) = 5 35 27.99 -5 17 20.1
  Extent = 1.7" x 1.4", rotation angle = 165 degrees
  Source counts = 89.1 +/- 10.3
  Background counts = 17.9
  Rate = 0.002 +/- 0.0002

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 6.49'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 1.89"
[Mon Feb 20 12:42:49 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.075
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 1.89"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 105.543000, observed total counts = 105.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 65 = 0.805167 pixels
[Mon Feb 20 23:29:22 2012] 106.921500 total counts/ 37.470200 bgd. counts: snr = 11.345859
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.805167 pixels
  Position = (893.7, 847.2) = 5 35 28.03 -5 17 20.5
  Extent = 1.1 (1.0-1.3)", rotation angle = 0
  Source counts = 69.5 +/- 10.3
  Background counts = 37.5
  Rate = 0.001 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 1.12"
[Mon Feb 20 23:31:09 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.162
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 1.12"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 87.998200, observed total counts = 88.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 65 = 0.128530 pixels
[Tue Feb 21 10:27:02 2012] 87.445300 total counts/ 22.184500 bgd. counts: snr = 13.855671
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.128530 pixels
  Position = (893.8, 847.0) = 5 35 28.02 -5 17 20.6
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 65.3 +/- 9.4
  Background counts = 22.2
  Rate = 0.001 +/- 0.0002
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:52 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_src.reg
[Tue Feb 21 10:28:52 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (844, 797) - (943, 897)
[Tue Feb 21 10:28:52 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65.gif
[Tue Feb 21 10:45:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_src.evt.gz[events] = 87 counts
[Tue Feb 21 10:45:03 2012] Mean chipx,y = (845.72, 323.49)
[Tue Feb 21 10:45:03 2012] Mean tdetx,y = (3384.49, 4286.28)
[Tue Feb 21 10:45:03 2012] chipx,y range = (822.00-868.00, 302.00-345.00)
[Tue Feb 21 10:45:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_bgd.evt.gz[events] = 53 counts
[Tue Feb 21 10:45:04 2012] Not generating rmf since there are only 65 counts
[Tue Feb 21 10:45:04 2012] arf not found, will run specextract
[Tue Feb 21 10:45:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_bkg.pi not found
[Tue Feb 21 10:45:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65.warf not found
[Tue Feb 21 10:45:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65.wrmf not found
[Tue Feb 21 10:45:10 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65.soff failed
[Tue Feb 21 10:45:10 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_src.pi
[Tue Feb 21 11:03:57 2012] 187.885
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.0014, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 1.5e-14
[Tue Feb 21 13:21:57 2012] Source 65 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete