[Mon Feb 20 12:34:34 2012] Detection parameters:
  Position = (762.4, 750.6) = 5 35 32.34 -5 18 7.7
  Extent = 1.5" x 1.2", rotation angle = 162 degrees
  Source counts = 215.4 +/- 15.4
  Background counts = 21.6
  Rate = 0.005 +/- 0.0003

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 6.44'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 1.86"
[Mon Feb 20 12:42:49 2012] source mask rpix=3.8, npix_max = 73, mask sum = 81, frac = 1.103
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 1.86"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src63.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src63 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 222.419000, observed total counts = 223.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 63 = 0.929225 pixels
[Mon Feb 20 23:29:22 2012] 221.577000 total counts/ 21.517000 bgd. counts: snr = 43.129002
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.929225 pixels
  Position = (763.3, 751.0) = 5 35 32.33 -5 18 7.8
  Extent = 1.8 (1.5-2.0)", rotation angle = 0
  Source counts = 200.1 +/- 14.9
  Background counts = 21.5
  Rate = 0.004 +/- 0.0003
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 1.75"
[Mon Feb 20 23:31:09 2012] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.971
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 1.75"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src63.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src63 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 220.762000, observed total counts = 221.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 63 = 0.063270 pixels
[Tue Feb 21 10:27:02 2012] 220.007100 total counts/ 24.504100 bgd. counts: snr = 39.494266
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.063270 pixels
  Position = (763.3, 750.9) = 5 35 32.32 -5 18 7.8
  Extent = 1.7 (1.4-2.0)", rotation angle = 0
  Source counts = 195.5 +/- 14.8
  Background counts = 24.5
  Rate = 0.004 +/- 0.0003
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:52 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_src.reg
[Tue Feb 21 10:28:52 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (685, 672) - (842, 830)
[Tue Feb 21 10:28:52 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63.gif
[Tue Feb 21 10:44:33 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_src.evt.gz[events] = 230 counts
[Tue Feb 21 10:44:33 2012] Mean chipx,y = (699.53, 396.60)
[Tue Feb 21 10:44:33 2012] Mean tdetx,y = (3457.60, 4432.47)
[Tue Feb 21 10:44:33 2012] chipx,y range = (674.00-725.00, 373.00-423.00)
[Tue Feb 21 10:44:33 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 163 counts
[Tue Feb 21 10:44:35 2012] rmf not found, will run specextract
[Tue Feb 21 10:44:35 2012] arf not found, will run specextract
[Tue Feb 21 10:44:41 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_bkg.pi not found
[Tue Feb 21 10:44:41 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63.warf not found
[Tue Feb 21 10:44:41 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63.wrmf not found
[Tue Feb 21 10:44:41 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63.soff failed
[Tue Feb 21 10:44:41 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_src.pi
[Tue Feb 21 11:03:57 2012] 187.38
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.00419, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 4.5e-14
[Tue Feb 21 13:21:57 2012] Source 63 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete