[Mon Feb 20 12:34:34 2012] Detection parameters:
  Position = (805.6, 729.3) = 5 35 30.91 -5 18 18.2
  Extent = 1.5" x 1.1", rotation angle = 153 degrees
  Source counts = 98.4 +/- 10.6
  Background counts = 14.6
  Rate = 0.002 +/- 0.0002

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 6.08'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 1.67 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 1.67"
[Mon Feb 20 12:42:49 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.921
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 1.67"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 105.564000, observed total counts = 107.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 61 = 1.286824 pixels
[Mon Feb 20 23:29:22 2012] 104.209400 total counts/ 15.302700 bgd. counts: snr = 22.727437
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.286824 pixels
  Position = (806.3, 730.4) = 5 35 30.91 -5 18 18.0
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 88.9 +/- 10.2
  Background counts = 15.3
  Rate = 0.002 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 1.26"
[Mon Feb 20 23:31:09 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 1.26"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src61.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src61 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 102.695000, observed total counts = 103.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 61 = 0.221380 pixels
[Tue Feb 21 10:27:02 2012] 100.367400 total counts/ 23.422200 bgd. counts: snr = 15.898922
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.221380 pixels
  Position = (806.5, 730.4) = 5 35 30.90 -5 18 17.9
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 76.9 +/- 10.0
  Background counts = 23.4
  Rate = 0.002 +/- 0.0002
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:52 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_src.reg
[Tue Feb 21 10:28:52 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (757, 681) - (856, 780)
[Tue Feb 21 10:28:52 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61.gif
[Tue Feb 21 10:44:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_src.evt.gz[events] = 102 counts
[Tue Feb 21 10:44:03 2012] Mean chipx,y = (739.74, 425.23)
[Tue Feb 21 10:44:03 2012] Mean tdetx,y = (3486.23, 4392.26)
[Tue Feb 21 10:44:03 2012] chipx,y range = (719.00-759.00, 403.00-443.00)
[Tue Feb 21 10:44:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_bgd.evt.gz[events] = 74 counts
[Tue Feb 21 10:44:04 2012] Not generating rmf since there are only 76 counts
[Tue Feb 21 10:44:04 2012] arf not found, will run specextract
[Tue Feb 21 10:44:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_bkg.pi not found
[Tue Feb 21 10:44:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61.warf not found
[Tue Feb 21 10:44:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61.wrmf not found
[Tue Feb 21 10:44:10 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61.soff failed
[Tue Feb 21 10:44:10 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_src.pi
[Tue Feb 21 11:03:57 2012] 188.413
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.00165, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 1.8e-14
[Tue Feb 21 13:21:57 2012] Source 61 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete