[Mon Feb 20 12:34:33 2012] Detection parameters:
  Position = (1119.7, 434.5) = 5 35 20.57 -5 20 43.3
  Extent = 0.6" x 0.5", rotation angle = 136 degrees
  Source counts = 220.4 +/- 15.3
  Background counts = 12.6
  Rate = 0.005 +/- 0.0003

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 2.64'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Feb 20 12:42:49 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.943
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 0.51"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 239.781000, observed total counts = 240.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 51 = 0.722728 pixels
[Mon Feb 20 23:29:22 2012] 240.562900 total counts/ 18.830900 bgd. counts: snr = 51.096698
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.722728 pixels
  Position = (1120.2, 435.0) = 5 35 20.57 -5 20 43.3
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 221.7 +/- 15.5
  Background counts = 18.8
  Rate = 0.005 +/- 0.0003
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.295
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 0.62"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 245.000000, observed total counts = 245.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 51 = 0.006776 pixels
[Tue Feb 21 10:27:02 2012] 245.793800 total counts/ 25.015800 bgd. counts: snr = 44.141653
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.006776 pixels
  Position = (1120.2, 435.0) = 5 35 20.57 -5 20 43.3
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 220.8 +/- 15.7
  Background counts = 25.0
  Rate = 0.005 +/- 0.0003
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:51 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_src.reg
[Tue Feb 21 10:28:51 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1092, 407) - (1148, 463)
[Tue Feb 21 10:28:51 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51.gif
[Tue Feb 21 10:41:32 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_src.evt.gz[events] = 229 counts
[Tue Feb 21 10:41:32 2012] Mean chipx,y = (996.73, 769.32)
[Tue Feb 21 10:41:32 2012] Mean tdetx,y = (3830.32, 4135.27)
[Tue Feb 21 10:41:32 2012] chipx,y range = (977.00-1017.00, 752.00-789.00)
[Tue Feb 21 10:41:32 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_bgd.evt.gz[events] = 44 counts
[Tue Feb 21 10:41:34 2012] rmf not found, will run specextract
[Tue Feb 21 10:41:34 2012] arf not found, will run specextract
[Tue Feb 21 10:41:39 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_bkg.pi not found
[Tue Feb 21 10:41:39 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51.warf not found
[Tue Feb 21 10:41:39 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51.wrmf not found
[Tue Feb 21 10:41:39 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51.soff failed
[Tue Feb 21 10:41:39 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_src.pi
[Tue Feb 21 11:03:57 2012] 194.509
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.00474, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 4.8e-14
[Tue Feb 21 13:21:57 2012] Source 51 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete