[Mon Feb 20 12:34:33 2012] Detection parameters:
  Position = (1134.4, 433.1) = 5 35 20.08 -5 20 44.0
  Extent = 0.5" x 0.5", rotation angle = 150 degrees
  Source counts = 155.1 +/- 13.1
  Background counts = 15.9
  Rate = 0.003 +/- 0.0003

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 2.57'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Feb 20 12:42:49 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.968
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 0.50"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Feb 20 23:29:22 2012] Source 49 is offset by -3.647041 and 3.221992 pixels which is larger than
2 X fitted extent = 0.512126 x 0.512126, not incorporating fit results
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Mon Feb 20 23:31:09 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.968
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 0.50"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 176.915000, observed total counts = 176.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 49 = 0.654885 pixels
[Tue Feb 21 10:27:02 2012] 176.075900 total counts/ 21.198900 bgd. counts: snr = 33.638008
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.654885 pixels
  Position = (1134.9, 433.6) = 5 35 20.08 -5 20 44.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 154.9 +/- 13.3
  Background counts = 21.2
  Rate = 0.003 +/- 0.0003
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:51 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_src.reg
[Tue Feb 21 10:28:51 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1107, 406) - (1163, 461)
[Tue Feb 21 10:28:51 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49.gif
[Tue Feb 21 10:41:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_src.evt.gz[events] = 161 counts
[Tue Feb 21 10:41:03 2012] Mean chipx,y = (1006.57, 775.35)
[Tue Feb 21 10:41:03 2012] Mean tdetx,y = (3836.35, 4125.43)
[Tue Feb 21 10:41:03 2012] chipx,y range = (990.00-1023.00, 755.00-794.00)
[Tue Feb 21 10:41:03 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 48 counts
[Tue Feb 21 10:41:04 2012] rmf not found, will run specextract
[Tue Feb 21 10:41:04 2012] arf not found, will run specextract
[Tue Feb 21 10:41:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_bkg.pi not found
[Tue Feb 21 10:41:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49.warf not found
[Tue Feb 21 10:41:10 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49.wrmf not found
[Tue Feb 21 10:41:10 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49.soff failed
[Tue Feb 21 10:41:10 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_src.pi
[Tue Feb 21 11:03:57 2012] 152.04
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_src.pi
[Tue Feb 21 13:21:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:20 2012] Using photon index=1.80, rate=0.00332, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49.arf
[Tue Feb 21 13:21:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:20 2012] Updating source flux to 4.3e-14
[Tue Feb 21 13:21:57 2012] Flag b found in src. 49 procflags, skipping spectral fitting
[Tue Feb 21 13:21:57 2012] Source 49 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete