[Mon Feb 20 12:34:33 2012] Detection parameters:
  Position = (970.6, 329.0) = 5 35 25.48 -5 21 35.2
  Extent = 0.6" x 0.5", rotation angle = 110 degrees
  Source counts = 157.7 +/- 12.8
  Background counts = 7.3
  Rate = 0.003 +/- 0.0003

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 2.85'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Mon Feb 20 12:42:49 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.143
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 0.55"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src43 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 164.000000, observed total counts = 164.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 43 = 0.758863 pixels
[Mon Feb 20 23:29:22 2012] 164.440100 total counts/ 11.880100 bgd. counts: snr = 44.261959
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.758863 pixels
  Position = (971.1, 329.5) = 5 35 25.48 -5 21 35.2
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 152.6 +/- 12.8
  Background counts = 11.9
  Rate = 0.003 +/- 0.0003
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.80"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.114
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 0.80"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 164.924000, observed total counts = 165.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 43 = 0.035022 pixels
[Tue Feb 21 10:27:02 2012] 165.051000 total counts/ 12.419000 bgd. counts: snr = 43.311406
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.035022 pixels
  Position = (971.1, 329.6) = 5 35 25.48 -5 21 35.1
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 152.6 +/- 12.8
  Background counts = 12.4
  Rate = 0.003 +/- 0.0003
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:51 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_src.reg
[Tue Feb 21 10:28:51 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (935, 293) - (1008, 366)
[Tue Feb 21 10:28:51 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43.gif
[Tue Feb 21 10:39:33 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_src.evt.gz[events] = 162 counts
[Tue Feb 21 10:39:33 2012] Mean chipx,y = (832.04, 847.56)
[Tue Feb 21 10:39:33 2012] Mean tdetx,y = (3908.56, 4299.96)
[Tue Feb 21 10:39:33 2012] chipx,y range = (813.00-850.00, 829.00-871.00)
[Tue Feb 21 10:39:33 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 66 counts
[Tue Feb 21 10:39:34 2012] rmf not found, will run specextract
[Tue Feb 21 10:39:34 2012] arf not found, will run specextract
[Tue Feb 21 10:39:40 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_bkg.pi not found
[Tue Feb 21 10:39:40 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43.warf not found
[Tue Feb 21 10:39:40 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43.wrmf not found
[Tue Feb 21 10:39:40 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43.soff failed
[Tue Feb 21 10:39:40 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_src.pi
[Tue Feb 21 11:03:56 2012] 194.269
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_src.pi
[Tue Feb 21 13:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:19 2012] Using photon index=1.80, rate=0.00327, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43.arf
[Tue Feb 21 13:21:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:19 2012] Updating source flux to 3.3e-14
[Tue Feb 21 13:21:57 2012] Source 43 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete