[Mon Feb 20 12:34:32 2012] Detection parameters:
  Position = (1024.6, 252.4) = 5 35 23.70 -5 22 12.9
  Extent = 0.6" x 0.5", rotation angle = 174 degrees
  Source counts = 52.2 +/- 7.5
  Background counts = 4.8
  Rate = 0.001 +/- 0.0002

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 2.17'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Feb 20 12:42:49 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.130
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 0.45"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 59.735400, observed total counts = 60.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 33 = 0.874419 pixels
[Mon Feb 20 23:29:22 2012] 59.182330 total counts/ 9.373030 bgd. counts: snr = 16.269359
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.874419 pixels
  Position = (1025.3, 253.0) = 5 35 23.70 -5 22 12.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 49.8 +/- 7.7
  Background counts = 9.4
  Rate = 0.001 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.710
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 0.47"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 60.220200, observed total counts = 61.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 33 = 0.002112 pixels
[Tue Feb 21 10:27:02 2012] 59.211900 total counts/ 9.559300 bgd. counts: snr = 16.059386
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.002112 pixels
  Position = (1025.3, 253.0) = 5 35 23.70 -5 22 12.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 49.7 +/- 7.7
  Background counts = 9.6
  Rate = 0.001 +/- 0.0002
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:51 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_src.reg
[Tue Feb 21 10:28:51 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1004, 231) - (1047, 275)
[Tue Feb 21 10:28:51 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33.gif
[Tue Feb 21 10:37:01 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_src.evt.gz[events] = 52 counts
[Tue Feb 21 10:37:01 2012] Mean chipx,y = (868.87, 932.62)
[Tue Feb 21 10:37:01 2012] Mean tdetx,y = (3993.62, 4263.13)
[Tue Feb 21 10:37:01 2012] chipx,y range = (856.00-891.00, 916.00-949.00)
[Tue Feb 21 10:37:01 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 20 counts
[Tue Feb 21 10:37:02 2012] Not generating rmf since there are only 49 counts
[Tue Feb 21 10:37:02 2012] arf not found, will run specextract
[Tue Feb 21 10:37:08 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_bkg.pi not found
[Tue Feb 21 10:37:08 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33.warf not found
[Tue Feb 21 10:37:08 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33.wrmf not found
[Tue Feb 21 10:37:08 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33.soff failed
[Tue Feb 21 10:37:08 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_src.pi
[Tue Feb 21 11:03:56 2012] 193.307
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_src.pi
[Tue Feb 21 13:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:19 2012] Using photon index=1.80, rate=0.00106, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33.arf
[Tue Feb 21 13:21:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:19 2012] Updating source flux to 1.1e-14
[Tue Feb 21 13:21:57 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete