[Mon Feb 20 12:34:32 2012] Detection parameters:
  Position = (1046.4, 194.1) = 5 35 22.98 -5 22 41.6
  Extent = 0.7" x 0.5", rotation angle = 145 degrees
  Source counts = 51.8 +/- 7.5
  Background counts = 5.2
  Rate = 0.001 +/- 0.0002

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 1.85'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Feb 20 12:42:49 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.827
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.42"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 58.019200, observed total counts = 58.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 27 = 0.791760 pixels
[Mon Feb 20 23:29:22 2012] 58.485480 total counts/ 6.994380 bgd. counts: snr = 19.469624
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.791760 pixels
  Position = (1047.1, 194.4) = 5 35 22.98 -5 22 41.7
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 51.5 +/- 7.6
  Background counts = 7.0
  Rate = 0.001 +/- 0.0002
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.974
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 0.62"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 58.441200, observed total counts = 59.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 27 = 0.015245 pixels
[Tue Feb 21 10:27:02 2012] 59.105390 total counts/ 9.560890 bgd. counts: snr = 16.023091
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.015245 pixels
  Position = (1047.1, 194.4) = 5 35 22.98 -5 22 41.7
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 49.5 +/- 7.7
  Background counts = 9.6
  Rate = 0.001 +/- 0.0002
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:51 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_src.reg
[Tue Feb 21 10:28:51 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1020, 167) - (1075, 222)
[Tue Feb 21 10:28:51 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27.gif
[Tue Feb 21 10:35:31 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_src.evt.gz[events] = 54 counts
[Tue Feb 21 10:35:31 2012] Mean chipx,y = (885.31, 995.98)
[Tue Feb 21 10:35:31 2012] Mean tdetx,y = (4056.98, 4246.69)
[Tue Feb 21 10:35:31 2012] chipx,y range = (863.00-902.00, 978.00-1013.00)
[Tue Feb 21 10:35:31 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 32 counts
[Tue Feb 21 10:35:32 2012] Not generating rmf since there are only 49 counts
[Tue Feb 21 10:35:32 2012] arf not found, will run specextract
[Tue Feb 21 10:35:38 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_bkg.pi not found
[Tue Feb 21 10:35:38 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27.warf not found
[Tue Feb 21 10:35:38 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27.wrmf not found
[Tue Feb 21 10:35:38 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27.soff failed
[Tue Feb 21 10:35:38 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_src.pi
[Tue Feb 21 11:03:56 2012] 192.037
[Tue Feb 21 13:21:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:17 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_src.pi
[Tue Feb 21 13:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:19 2012] Using photon index=1.80, rate=0.00106, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27.arf
[Tue Feb 21 13:21:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:19 2012] Updating source flux to 1.1e-14
[Tue Feb 21 13:21:57 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete