[Mon Feb 20 12:34:29 2012] Detection parameters:
  Position = (1062.7, 276.3) = 5 35 22.44 -5 22 1.1
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 334.9 +/- 18.6
  Background counts = 11.1
  Rate = 0.007 +/- 0.0004

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 1.98'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Feb 20 12:42:49 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.199
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.43"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 352.000000, observed total counts = 352.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 11 = 0.704863 pixels
[Mon Feb 20 23:29:22 2012] 352.366300 total counts/ 26.156300 bgd. counts: snr = 63.783613
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.704863 pixels
  Position = (1063.2, 276.8) = 5 35 22.44 -5 22 1.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 326.2 +/- 18.8
  Background counts = 26.2
  Rate = 0.007 +/- 0.0004
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Feb 20 23:31:09 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.009
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.49"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 352.000000, observed total counts = 352.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 11 = 0.001147 pixels
[Tue Feb 21 10:27:02 2012] 352.405100 total counts/ 26.679100 bgd. counts: snr = 63.061869
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.001147 pixels
  Position = (1063.2, 276.8) = 5 35 22.44 -5 22 1.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 325.7 +/- 18.8
  Background counts = 26.7
  Rate = 0.007 +/- 0.0004
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:50 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_src.reg
[Tue Feb 21 10:28:50 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1041, 255) - (1085, 299)
[Tue Feb 21 10:28:50 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11.gif
[Tue Feb 21 10:31:30 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_src.evt.gz[events] = 335 counts
[Tue Feb 21 10:31:30 2012] Mean chipx,y = (912.30, 917.94)
[Tue Feb 21 10:31:30 2012] Mean tdetx,y = (3978.94, 4219.70)
[Tue Feb 21 10:31:30 2012] chipx,y range = (893.00-935.00, 898.00-934.00)
[Tue Feb 21 10:31:30 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 33 counts
[Tue Feb 21 10:31:31 2012] rmf not found, will run specextract
[Tue Feb 21 10:31:31 2012] arf not found, will run specextract
[Tue Feb 21 10:31:37 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_bkg.pi not found
[Tue Feb 21 10:31:37 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11.warf not found
[Tue Feb 21 10:31:37 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11.wrmf not found
[Tue Feb 21 10:31:37 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11.soff failed
[Tue Feb 21 10:31:37 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_src.pi
[Tue Feb 21 11:03:56 2012] 194.2
[Tue Feb 21 13:21:16 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:16 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_src.pi
[Tue Feb 21 13:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:19 2012] Using photon index=1.80, rate=0.00699, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11.arf
[Tue Feb 21 13:21:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:19 2012] Updating source flux to 7.1e-14
[Tue Feb 21 13:21:57 2012] Source 11 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete