[Mon Feb 20 12:34:29 2012] Detection parameters:
  Position = (1186.5, 202.5) = 5 35 18.37 -5 22 37.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 1542.4 +/- 39.8
  Background counts = 45.6
  Rate = 0.03 +/- 0.0008

[Mon Feb 20 12:34:39 2012] Off-axis axis estimate = 0.80'
[Mon Feb 20 12:42:49 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:42:49 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 20 12:42:49 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.381
[Mon Feb 20 12:42:49 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10.csv
[Mon Feb 20 15:01:45 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10_1.ximg exists
[Mon Feb 20 15:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10.csv
[Mon Feb 20 15:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Mon Feb 20 15:01:46 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Feb 20 15:01:46 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Feb 20 23:29:22 2012] Spatial fit model total counts = 1779.910000, observed total counts = 1776.000000
[Mon Feb 20 23:29:22 2012] Offset between fit and detection position for source 10 = 0.543308 pixels
[Mon Feb 20 23:29:22 2012] 1784.779000 total counts/ 148.669000 bgd. counts: snr = 134.184480
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.543308 pixels
  Position = (1186.9, 202.9) = 5 35 18.37 -5 22 37.5
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 1636.1 +/- 42.2
  Background counts = 148.7
  Rate = 0.04 +/- 0.0009
[Mon Feb 20 23:29:23 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:29:23 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 23:29:23 2012] Source does appear to be extended
[Mon Feb 20 23:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:31:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 23:31:09 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Feb 20 23:31:09 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.075
[Mon Feb 20 23:31:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.47"
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10.csv
[Tue Feb 21 01:40:11 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Feb 21 01:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10.csv
[Tue Feb 21 01:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf00018_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 21 01:40:12 2012] fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 21 01:40:12 2012] Fit fullrun_ccd0_acisf00018_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 21 10:27:02 2012] Spatial fit model total counts = 1785.150000, observed total counts = 1779.000000
[Tue Feb 21 10:27:02 2012] Offset between fit and detection position for source 10 = 0.004241 pixels
[Tue Feb 21 10:27:02 2012] 1783.270000 total counts/ 143.350000 bgd. counts: snr = 136.969482
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.004241 pixels
  Position = (1186.9, 202.9) = 5 35 18.37 -5 22 37.5
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 1639.9 +/- 42.2
  Background counts = 143.3
  Rate = 0.04 +/- 0.0009
[Tue Feb 21 10:27:03 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 10:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 10:27:03 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 10:27:03 2012] Source does appear to be extended
[Tue Feb 21 10:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 10:28:50 2012] Writing source region out to fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_src.reg
[Tue Feb 21 10:28:50 2012] Extracting stamp from image fullrun_ccd0_acisf00018_pi14-548_cl_sm2.00.img.gz, (1166, 182) - (1207, 224)
[Tue Feb 21 10:28:50 2012] Writing fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10.gif
[Tue Feb 21 10:31:15 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_src.evt.gz[events] = 1674 counts
[Tue Feb 21 10:31:15 2012] Mean chipx,y = (1012.18, 1006.65)
[Tue Feb 21 10:31:15 2012] Mean tdetx,y = (4067.65, 4119.82)
[Tue Feb 21 10:31:15 2012] chipx,y range = (1002.00-1023.00, 991.00-1023.00)
[Tue Feb 21 10:31:15 2012] Size of ../../acisf00018/products/events/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 87 counts
[Tue Feb 21 10:31:17 2012] rmf not found, will run specextract
[Tue Feb 21 10:31:17 2012] arf not found, will run specextract
[Tue Feb 21 10:31:22 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_bkg.pi not found
[Tue Feb 21 10:31:22 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10.warf not found
[Tue Feb 21 10:31:22 2012] ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10.wrmf not found
[Tue Feb 21 10:31:22 2012] Removal of ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10.soff failed
[Tue Feb 21 10:31:22 2012] Failed to rename ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_grp.pi to ../../acisf00018/products/spectra/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_src.pi
[Tue Feb 21 11:03:56 2012] 78.3418
[Tue Feb 21 13:21:16 2012] Updating aperture counts using extracted products
[Tue Feb 21 13:21:16 2012] Error reading totcts from fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_src.pi
[Tue Feb 21 13:21:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:21:19 2012] Using photon index=1.80, rate=0.0352, arf fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10.arf
[Tue Feb 21 13:21:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 13:21:19 2012] Updating source flux to 8.7e-13
[Tue Feb 21 13:21:57 2012] Source 10 has no response, skipping
[Tue Feb 21 13:21:58 2012] acisf00018/analysis//spectral/fullrun_ccd0_acisf00018_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete